304190
2
Zoom out
Zoom in
Previous page
1/14
Next page
17
Before Using The Washing Machine
1. Remove the packaging
and check
After unpacking, make sure
that the washing machine is
undamaged. If in doubt, do
not use the washing machine.
Contact After-Sales Service or
your local retailer
Check that the accessories
and supplied parts are all
present
Keep the packing material
(plastic bags, polystyrene
parts, etc.) out of reach of
children, as they are
potentially dangerous
2. Remove the transport
bolts
The washing machine is fitted
with a transport bolts to
avoid any possible damage to
the interior during transport.
Before using the washing
machine, it is imperative that
the transport bolts are
removed
3. Install the washing
machine
Remove the protective foil
from the control panel
Move the appliance without
lifting it by the worktop
Install the appliance on a
solid and level floor surface,
preferably in a corner of the
room
Make sure that all four feet
are resting firmly on the floor
and check that the appliance
is perfectly level (use a spirit
level)
4. Water inlet
Connect the water supply
inlet hose in accordance with
regulations of your local
water company
5. Drain hose
Connect the drain hose to the
siphon or hook it over the
edge of a sink by means of the
“U” bend supplied
If the washing machine is
connected to a built-in
pumping out system, ensure
that the latter is equipped
with a vent to avoid
simultaneous loading and
draining of water (siphoning
effect)
6. Electrical connections
Electrical connections must be
carried out by a qualified
technician in compliance with
the manufacturer’s
instructions and local safety
regulations
Data concerning voltage,
consumption and fuses are
located on the inside of the
appliance door
The appliance must be
connected to the mains
exclusively by means of a
socket with an earth
connection in accordance with
established regulations. The
washing machine must be
earthed by law. The
manufacturer declines all
liability for damage to
property or injury to persons or
animals due to non-
compliance with the directions
given above
Do not use extension leads or
multi sockets
Before any maintenance on
the washing machine
disconnect it from the mains
supply
Access to the mains plug or to
disconnection from mains
supply via a double-pole switch
must be ensured at all times
following the installation
Do not operate the washing
machine if it has been
damaged during transport.
Inform the After-Sales Service
Mains cable replacement is
only to be carried out by
After-Sales Service
The washing machine must
only be used in the household
for the prescribed uses
Minimum housing
dimensions:
Width: 600 mm
Height: 825 mm
Depth: 600 mm
Water inlet: Cold water only
Tap: 3/4 threaded
hose
connection
Water
pressure
(flow
pressure):
100-1000 kPa
(1-10 bar)
4gb15161.fm5 Page 17 Tuesday, March 19, 2002 6:16 PM
Black Process Plate
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht wad 6760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht wad 6760 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht wad 6760

Bauknecht wad 6760 User Manual - German - 15 pages

Bauknecht wad 6760 User Manual - Dutch - 13 pages

Bauknecht wad 6760 User Manual - French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info