75389
2
Zoom out
Zoom in
Previous page
1/17
Next page
Before Using The Washing Machine
1.Remove the packaging
and check
After unpacking, make
sure that the washing
machine is undamaged. If
in doubt, do not use the
washing machine. Contact
After-Sales Service or your
local dealer.
Keep the packaging
materials (plastic bags,
polystyrene parts, etc.) out
of reach of children, since it
is a possible source of
danger.
If the appliance was
exposed to the cold prior to
delivery, keep it at room
temperature for a few
hours before operating.
2.Remove the transit
bolts
The appliance is fitted with
transit bolts to prevent
internal damage during
transport. Before using
the washing machine
you must remove the
transit bolts (see
“Installation/Remove the
transit bolts”).
3.Install the washing
machine
Install the appliance on a
solid and level floor
surface. In the case of a
yielding sub-floor, the
appliance should be
installed in the corner of a
room.
Adjust the feet to ensure
that the machine is stable
and level on the floor (see
“Installation/Adjust the
feet”).
In case of wooden or so-
called “floating floors” (for
instance certain parquet or
laminate floors), place the
appliance on a 60 x 68 cm
sheet of plywood at least 3
cm in thickness which is
secured to the floor.
4.Water inlet
Connect the water supply
inlet hose in accordance
with the regulations of
your local water company
(see “Installation/Connect
the water supply hose“
and instructions on the
hose bag).
Water
supply: Cold water only
Tap: 3/4” threaded
hose
connection
Pressure: 100-1000 kPa
(1-10 bar).
Use only new hoses to
connect the washing
machine to the water
supply. Used hoses must
not be used and should be
discarded.
5.Drain hose
Connect the drain hose to the
ventilated siphon or hook it
over the edge of a sink by
means of the “U” bend (see
“Installation/Connect the
water drain hose“).
6.Electrical connections
Electrical connections must
be carried out by a
qualified electrician in
compliance with the
manufacturer's
instructions and local
safety regulations.
Voltage information, power
consumption and electrical
fusing data are supplied on
the front panel behind the
door frame.
The appliance must be
connected to the mains
exclusively by means of a
socket with an earth
connection in accordance
with established
regulations. The appliance
must be earthed by law.
The manufacturer declines
all liability for possible
damage to property or
injury to persons or pets
deriving from failure to
observe the a/m directions.
Do not use extension leads
or multi sockets.
Before any maintenance on
the washing machine
disconnect the power plug
or switch off the power
supply.
Access to the mains plug or
to disconnection from
mains supply via a double-
pole switch must be
ensured at all times
following the installation.
Do not operate the
washing machine if it has
been damaged during
transport. Inform the
After-Sales Service.
Mains cable replacement is
only to be carried out by
After-Sales Service.
The washing machine must
only be used in the
household for the
prescribed uses.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WAB 8900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WAB 8900 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WAB 8900

Bauknecht WAB 8900 User Manual - German - 16 pages

Bauknecht WAB 8900 User Manual - Dutch - 14 pages

Bauknecht WAB 8900 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info