44086
19
Zoom out
Zoom in
Previous page
1/21
Next page
19
The water is not pumped
out of the washing
machine.
The notice FP appears in the
display.
Switch the appliance off and pull
out the mains plug.
Check whether:
the drain hose is kinked
the pump or the filter is
blocked (see Removing The
Filter)
IMPORTANT:
Before emptying
ensure that the water has
cooled down.
the water in the drain hose is
frozen up
Reconnect the appliance to the
electrical socket.
Switch the washing machine on
again, select a programme and
start the appliance. To rinse the
laundry, we recommend a short
programme without the
addition of detergent.
If the fault occurs again, please
contact After-Sales Service (see
After-Sales Service).
There is a fault in an
electrical component.
A notice from F4 to F16
appears in the display.
press the Reset
button and
start the programme again
with the Start/Pause button
if the fault occurs again, please
contact After-Sales Service (see
After-Sales Service)
There is a fault in the
Water Stop.
The message Excessive Foam!
or FA
appears on the display
and the pump operates.
The Water Stop fault may have
been triggered by:
1.
excess foaming;
2.
a leak in the washing
machine.
In this case the pump is switched
on automatically in order to
pump the water out.
Switch the appliance off, pull out
the mains plug and turn the
water tap off. Tilt the appliance
forwards carefully to allow the
collected water to drain out of
the appliance base.
Then:
1.
Reinsert the mains plug in the
socket.
2.
Turn the water tap on (if
water immediately flows into
the appliance again, without
the appliance being started,
there is a fault. Turn the tap
off and notify After-Sales
Service, see After-Sales
Service).
3.
Switch the washing machine
on again, select the desired
programme and start the
appliance.
If the fault occurs again, please
contact After-Sales Service (see
After-Sales Service).
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WA3700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WA3700 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info