Manual Bauknecht WA 9787 (page 3 of 17) (English)

572353

Zoom out

Zoom in

1/17

5019 401 05426

Add detergent as indicated on the front page and as

described in the chapter “Detergent and Additives” in

your Instructions for Use.

Turn the programme selector to the desired programme.

The

temperature

and

spin speed

indicated on the

display can be altered by pressing the “Temperature”

button or the “Variable spin” button.

When the combination of programme and additional

option(s) is not possible, the indication lights switch off

automatically. Unsuitable combinations of options are

deselected automatically.

“Eco” button

• With a modified temperature profile and a slightly

prolonged washing duration, the optimum

combination of excellent washing result and even

lower energy consumption is achieved.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and

“Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun

very gently.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time by

approximately 15 min.

• Do not use liquid detergent for the main wash when

activating the Prewash option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water or for washing baby linen, and helps people

with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing and

prevent colours from changing.

• This option is particularly recommended for the

programmes “Synthetics”, “Daily load” and

“Delicates”.

• It is particularly useful if you want to postpone spinning

to a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave the laundry to

soak for too long.

Note:

The programme stops to “Rinse hold” at the

time the “Rinse hold” symbol on the display lights up.

The light over the

“Start”

button flashes.

Terminate the “Rinse hold” option:

• Press the

“Start”

button; the programme will

terminate automatically with the final spin cycle for the

present wash programme.

• If you do not wish to spin the clothes, select and start

the “Drain” programme.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during

rinse. The water is drained out only.

If there is a programme setting which you use frequently,

the appliance offers the possibility to save one setting for

each programme so that it can be used again by just

pushing one button.

• Select the desired programme, temperature, spin

speed and option(s), push and hold the

“Favourites”

button for at least 3 seconds. The lamp next to

“Favourites”

shortly flashes and then lights up - the

programme setting is saved.

CONSUMPTION DATA

Programme

Te m p e r a t u r e

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

White Cotton / Antibacterial 95 7.0 70

2.10 2:10

Cotton 60 7.0 65 1.33 2:10

Cotton with “Eco”

***

60 7.0 60 1.19 2:20

Cotton 40 7.0 65 0.75 2:05

SuperEco 60 7.0 62 0.84 4:00

Synthetics 60 3.5 48

0.95 1:35

Synthetics 40 3.5 44 0.55 1:20

Daily load 40 5.0 66 0.60 1:00

Quick wash 30 5.0 60 0.30 0:30

Delicates 30 2.5 60 0.45 0:50

Wool 40 2.0 60 0.65 0:45

Handwash 40 2.0 45 0.65 0:40

Handwash (Lingerie) 30 2.0 45 0.35 0:36

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home

may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the household

conditions applicable at that time.

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***

Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR

AND SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

SAVE YOUR FAVOURITE PROGRAMMES

Next time you want to use your individual programme

setting, select the programme, push the

“Favourites”

button and start by pushing

“Start”

If you want to replace the saved programme setting

by another one:

• Push the programme button, select temperature, spin

speed and options as desired and then press and hold

the

“Favourites”

button for at least 3 seconds. The

previously saved programme setting will be replaced

by the new one.

The “Start Delay” allows to run the machine at the

consumer’s convenience, for example at night when

electricity is cheaper.

• Select programme, temperature, spin speed and

options.

• Press the “Start Delay” button to select the delay time

up to 23 hours.

• Press the

“Start”

button.

The countdown of the delay time begins; the clock

symbol next to the delay time and the dot between

hours and minutes flash.

• The time delay indication disappears when the

programme starts and it is replaced by the remaining

programme time.

• Once having pressed the

“Start”

button, the number

of hours preselected can be reduced by pressing and

holding the “Start Delay” button. From 1 hour on, the

delay time can also be reduced by minutes.

To cancel the “Start Delay”

..before you press the “Start” button:

• Select another programme or press the

“Cancel/

Reset”

button.

..after having pressed the “Start” button:

• Press the

“Cancel/Reset”

button for at least

3 seconds - the start delay time disappears from the

display.

Open the tap and press the

“Start”

button. The light

over the

“Start”

button comes on. The programme

sequence indicator shows the current programme phase,

running from left to right through Wash, Rinse, Spin/Drain.

Before starting and after end of a programme, the symbol

lights to show that the door can be opened. As long as a

wash programme is running, the door remains locked and

must on no account be forced open. In case you have an

urgent need to open it during a running programme, refer

to “Cancel (Reset) a running programme before the end”.

You can lock the buttons of the control panel against

improper use (e.g. by children).

• Press the temperature and the spin speed button

simultaneously and hold them for at least 3 seconds.

The key symbol on the display lights up.

• To unlock the buttons again: proceed in the same way.

“Water tap closed”

The appliance has no or insufficient water supply. Open

the water tap; if the indication still lights up, refer to the

“Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain

hose is kinked or the filter must be cleaned; in the latter

case refer to the Instructions for Use (“Removing the

Filter”).

“Service”

Lighting up of the “Service” indication can be caused by a

fault in an electrical component. Refer to the

“Troubleshooting Guide” in your Instructions for Use; if

the fault persists, contact our After Sales Service.

• The symbols of the programme sequence indicator

are dark, and the “Door open” symbol lights up.

1. Turn the programme selector to the “Off/0” poisition.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

1. Press the

“Start”

button to pause the programme.

The light flashes.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the

“Start”

button again. The new programme

continues at the same position where the previous

programme was interrupted. Do not add detergent

for this programme.

The

“Cancel/Reset”

button cancels a programme before

the end.

• Press the

“Cancel/Reset”

button for at least

3 seconds. Any existing water is drained out before

the door can be opened.

START DELAY

PROGRAMME START

“DOOR OPEN” INDICATION

LOCK BUTTONS

RED INDICATIONS ON THE DISPLAY

PROGRAMME END

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

40105426GB.fm Page 2 Tuesday, September 11, 2007 7:12 PM

Black process 45.0° 100.0 LPI

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WA 9787 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WA 9787

Bauknecht WA 9787 User Manual - German - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bauknecht WA 9787 Manual

Product: