572349
24
Zoom out
Zoom in
Previous page
1/40
Next page
Installation
Remove the transit bolts
1.
Slacken the four bolts with
the spanner supplied.
2.
Remove by hand.
3.
Grip the bolt and remove it
through the large aperture.
4.
Seal the resulting holes
using the plastic caps
supplied; Insert the caps in
the direction of the arrow
in the large aperture and
insert them in the narrow
slot until they click into
place.
5.
Retain transit bolts.
Secure the washing
machine before
transporting it:
1.
Pry off the plastic caps with
a screwdriver, slide them in
the opposite direction to
the arrow and remove.
2.
Refit the transit bolts in
reverse order.
Adjust the feet
Small unevennesses in the floor
can be compensated for by
screwing the four appliance feet
up or down (never use pieces of
wood, cardboard or similar
material);
1.
Loosen the locknut using
the wrench provided.
2.
Adjust the height of the
foot by hand.
3.
Tighten the locknut
anticlockwise towards the
washing machine casing.
If the appliance is to be
installed on a wooden floor,
place it on a sheet of plywood
at least
60x60 cm in size and 3 cm thick.
Screw the plywood sheet firmly
to the floor.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WA 89890 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WA 89890 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WA 89890

Bauknecht WA 89890 User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info