572348
19
Zoom out
Zoom in
Previous page
1/23
Next page
37
For models with no fault display,
the washing machine stops in the
appropriate programme step.
First switch the washing machine
off and on again to continue
with the programme.
If the fault persists, please contact
After Sales Service (see “After
Sales Service”).
d.
“Water Stop” fault
(if
fitted)
The “Water Stop” fault may have
been triggered by:
1.
Excess foaming.
2.
A leak in the washing machine.
In this case the pump is switched
on automatically in order to
pump the water out.
For models with a fault display,
the “Water Stop” display lights
up, an acoustic signal sounds and
the spin speed indicator lights
flash. If a digital display is fitted,
“A
” and “F” are also displayed
alternately.
For models with no fault display,
the washing machine stops in the
appropriate programme step.
Switch the appliance off, pull out
the mains plug and turn the
water tap off.
Tilt the appliance forwards
carefully to allow the collected
water to flow out from the
bottom of the appliance.
Then:
1.
Plug in the appliance.
2.
Turn the water tap on (if water
immediately flows into the
appliance again, without the
appliance being started, there is
a fault. Turn off the tap and
notify After Sales Service).
3.
For models with fault display,
select and start the desired
programme again.
For models with no fault
display, continue the
programme by pressing the
“On/Off” button again.
If the fault occurs again, please
contact After Sales Service (see
“After Sales Service”).
“Water Stop” fault, when
the programme selector is
in the “ “position.
The pump is switched on
automatically in order to pump
the water out.
For models with fault display the
washing machine will also detect
a Water Stop fault (leak) if the
programme selector is in the
“position. In this case an
acoustic signal sounds and the
digital display (if fitted) displays
“A
” and “F” alternately.
For models with no fault display,
the “Water Stop” fault is
detected when the appliance is
switched on again.
Pull the mains plug out and
ensure that the water tap is
turned off.
Tilt the appliance forwards
carefully to allow the collected
water to flow out.
Then:
1.
Plug in the appliance.
2.
Turn the water tap on (if water
immediately flows into the
appliance again, without the
appliance being started, there
is a fault. Turn the tap off and
notify After Sales Service).
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WA 89880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WA 89880 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WA 89880

Bauknecht WA 89880 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info