305979
9
Zoom out
Zoom in
Previous page
1/18
Next page
29
Notes:
You can use liquid detergent in the “Prewash”
phase for programmes with this option. In this
case use only powder detergents for the main
wash.
If the “Start Delay” option is used, put liquid
detergent into the drum with a detergent ball.
When using concentrated fabric softeners,
add water in the detergent dispenser up to
“MAX” level mark.
To prevent dispensing problems when using
highly concentrated powder and liquid detergents,
use the special detergent ball supplied with the
detergent and place it inside the drum.
Dyeing: Usual products consist of dye colour,
fixing agent and salt. Pour the dye colour, the
fixing agent and then the salt directly into the
empty drum. Fill in the laundry only afterwards.
Use exclusively dyes and bleaches
recommended for washing machines.
Follow the Manufacturer’s instructions.
Plastic and rubber parts of the machine may
be stained by dyes or bleaches.
See also separate programme overview.
1. Set Programme Selector to the desired
programme. The indicator above the “Start/
Pause” button flashes and the programme
duration is shown on the display (if available).
2. Select additional options, if desired, pressing
the corresponding button.
The indicator for the option is lit up.
N.B.An audible tone is sounded if the
combination of programme and additional
option does not make sense. Unsuitable
combinations of additional options are
deselected automatically.
By a further pressing of the button the
additional option can be turned off again.
The Final Spin Speed is related to the
selected programme and is shown by means
of the indicator lamp.
The Final Spin Speed can be altered by
pressing the “Spin” button.
In some programmes the maximum final spin
speed is limited to go easy on your laundry
items. Selection of a higher spin speed is not
possible.
If “0” is selected, the laundry is not spun
following the final rinse cycle. The water is
simply pumped out. Intermediate spinning is
carried out at reduced speed.
3.
Press the “Start/Pause” button to start the
program
.
(If available)
1. Select the program and temperature, any
additional options and the spin speed.
2. Press the “Start Delay” button. The
associated lamp comes on and the indicator
above the “Start/Pause” button flashes.
Either keep the start delay button pressed or
else press it repeatedly until the desired
number of hours is reached. If the maximum
number of hours is reached for the delayed
start, further pressing of the button starts the
counter at zero again.
3. Press the “Start/Pause” button in order to
start the program.
The start delay hours can be corrected even
after the “Start/Pause” button has been
pressed. Again here either keep the “Start
Delay” button pressed or else press it
repeatedly until the desired number of hours is
reached. Once the display has counted down
to “00” the selected programme is started.
Cancelling the start delay: If, in fact, no start
delay was actually desired turn the
programme selector switch and then set it to
the desired position. The remaining time of the
selected programme is displayed and the
indicator above the “Start/Pause” button
flashes. The programme can now be started
immediately by pressing this button.
If the programme is changed after the start
delay, the start delay option is cleared and the
remaining time is displayed. The indicator
above the “Start/Pause” button flashes.
The programme is not started.
Note: With liquid detergent, a dosing aid
placed directly in the drum should be
used if a start delay has been selected.
DETERGENT AND ADDITIVES
DYEING AND BLEACHING
PROGRAMME SELECTION / PROGRAMME START
START DELAY
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht wa 8750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht wa 8750 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht wa 8750

Bauknecht wa 8750 User Manual - German - 18 pages

Bauknecht wa 8750 User Manual - Dutch - 18 pages

Bauknecht wa 8750 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info