449645
13
Zoom out
Zoom in
Previous page
1/18
Next page
33
This washing machine is equipped with automatic
safety functions which detect and diagnose faults
at an early stage and react appropriately.
Often, however, the faults detected are small
enough to be solved in a matter of minutes.
For example:
The appliance will not start, no lamp
lights up.
Check whether:
the appliance is plugged in;
the wall socket is functioning correctly
(use a table lamp or similar).
The appliance will not start, but the
“Start/Pause” lamp is flashing.
Check whether:
the appliance door is properly closed
(child safety);
a programme has been selected and the
programme is started;
the water tap is open.
The appliance stops during the
programme.
Check whether:
the
“Rinse Hold”
lamp is flashing, terminate
this option by pressing the button again;
another programme has been selected.
Reselect the desired programme and press
the
“Start/Pause
button;
“Start/Pause”
lamp is flashing. Press
“Start/
Pause”
button;
the door was opened and the
“Start/Pause”
lamp is flashing. Press it again;
Safety system of the appliance was activated.
See fault description table.
Detergent and additive product residues
in dispenser at end of wash.
Check whether:
the siphon is correctly installed and clean
(see “Care and Maintenance”);
enough water is being supplied. The mesh
filters could be clogged (see “Care and
Maintenance” / “Water Hose Mesh Filters”).
The appliance vibrates during the spin
cycle.
Check whether:
the appliance is level and solidly installed on
all four feet (see “Installation Instructions”);
the transit bolts have been removed. The
transit bolts must be removed before the
appliance can be used (see “Installation
Instructions”).
Final spin results are poor:
The appliance has an imbalance detection and
correction system. If individual heavy articles are
loaded (bathmat, bathrobe, etc.) this system may
reduce the spin speed automatically to protect the
appliance or even interrupt the spin cycle
altogether, if the imbalance is too great even after
several spin starts.
If the laundry is still too wet at the end of the
cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
Excessive foam formation may prevent
spinning. Ensure correct amount of detergent
is used.
TROUBLESHOOTING GUIDE
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WA 7661 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WA 7661 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WA 7661

Bauknecht WA 7661 User Manual - German - 18 pages

Bauknecht WA 7661 User Manual - Dutch - 18 pages

Bauknecht WA 7661 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info