305958
9
Zoom out
Zoom in
Previous page
1/19
Next page
28
Indicates the current programme step.
The indicator moves from left to right after the
programme start through Wash, Rinse and
Spin. At the end of the programme the indicator
returns to its initial position on the left side.
DOOR LOCK
When you start the programme the door is
automatically locked until the programme
terminates.
Door closed indicator lights up.
Exception:
When running the Cotton and Easy
care/Synthetics programmes (without prewash)
the door can be opened for adding further laundry
during the first 15 minutes. If Short/Rapid (Quick
wash) has been selected, however, this is not
possible.
If the programme selector knob is turned to the 0
position or the power supply is interrupted, the door
unlocks automatically after about 2 minutes.
PROGRAMME END
1.
Programme end is indicated by the fact that
-
the programme sequence indicator is no
longer visible.
-
the Door closed indicator is switched off.
2.
Cancel the selected special functions by
pressing the appropriate button again.
3.
Set the programme selector on "0".
The pilot lamp switches off.
4.
Open the door and remove the load.
5.
Turn off the tap(s).
Note:
Leave the door ajar so that the drum can dry.
PROGRAMME RESELECTION
a.
CONTINUING WITH A NEW PROGRAMME
OR TEMPERATURE SETTING
1. Select the new programme or
temperature setting.
2. Hold down the Start button for about
one second.
The new programme continues with the
same programme step at which the previous
programme was interrupted.
b.
CANCELLING THE CURRENT PROGRAMME
AND RESTARTING WITH A NEW ONE
Do not put more detergent into the machine for
the new programme, since almost no water is
drained out when a programme is cancelled.
1. Hold down the Start button for 5 seconds,
or until the programme control audibly
restarts.
2. Wait until the programme sequence
indicator has returned to its initial (leftmost)
position and has disappeared.
3. Set the programme selector to 0.
4. Select the new programme, temperature
and any special options desired.
5. Hold down the Start button for one second.
TO INTERRUPT/PAUSE A PROGRAMME
To interrupt the current programme for a certain
time and resume it later:
1.
Set the programme selector to 0.
2.
After the desired time, reselect the programme.
3.
Hold down the Start button for about one
second.
The programme continues.
TO STOP A PROGRAMME BEFORE THE
END AND DRAIN
To stop a programme before the end and drain
the water:
1.
Set the programme selector to "Drain".
2.
Hold down the Start button for about one
second.
The machine drains.
Only open the door when the programme
sequence indicator has returned to its initial
(leftmost) position and the Door Closed
indicator is off.
PROGRAMME SEQUENCE INDICATOR
DOOR LOCK / PROGRAMME END
PROGRAMME RESELECTION / INTERRUPTION
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht wa 4560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht wa 4560 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht wa 4560

Bauknecht wa 4560 User Manual - English - 17 pages

Bauknecht wa 4560 User Manual - German - 17 pages

Bauknecht wa 4560 User Manual - Dutch - 17 pages

Bauknecht wa 4560 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info