572333
5
Zoom out
Zoom in
Previous page
1/15
Next page
5019 407 00882
GB
TRK 9666
Quick Reference Guide
Before using the machine, please also read the instructions for use carefully!
(Subject to technical modifications)
4
Programme selector knob
The drying programme is selected by turning this knob.
“Start/Départ” button
The drying programme is started by pressing this button. The
indicator lamp flashes during the selection phase and lights up
during drying.
Indicator lamps
Filter
The indicator lamp lights up when the filter and/or heat
exchanger need cleaning.
Clean the filter at the end of every cycle.
Water container
The indicator lamp lights up when the water container needs
to be emptied. The drying cycle is automatically interrupted.
Empty the container and restart the drying programme.
Empty the water container after every drying cycle.
Clean heat exchanger
The Led lights up after 30 cycles when the heat exchanger
needs to be cleaned. Clean the heat exchanger. Then for
reset the led indication, turn the programme selector knob
to the vertical position indicated by the symbol “ ” and
press the “Start/Départ” button during 3 seconds until led
switches off.
Time remaining display
Depending on the programme selected, once the drying
cycle has been started, a default drying time is displayed. The
time displayed is corrected by a few minutes depending on
the volume, type and dampness of the laundry.
The drying time specified is a calculated value which
will be updated during the drying programme.
The flashing lines indicate that the calculation is running. The
remaining time will be updated.
Overdry protection
The indicator lamp lights up when a humidity controlled
program is selected, to indicate the working protection
function. Function is not active in time controlled
programmes 10’, 20’, 30’, 40’, 60’, 90’ and “Airing”
“”.
Dryness adjustment
This is an option to adjust the dryness of the laundry
according to your wishes. Select the desired programme and
the option dryness level adjustment by pressing the button
“+” for more dry or the button “-” for more humid. The
selected dryness will be stored as a pre-setting to the
selected drying programme. Using the drying programme
next time the pre-setting appears. By pressing the dryness
adjustment buttons “+” or “-” the pre-setting can be
changed.
Programme sequence
Overdry
protection
Drying
Anti-
crease
End
of cycle
Options
Gentle
Reduces drying intensity (recommended
for delicate items).
Rapid
Shortens drying duration (recommended for thin items of
the same size).
Buzzer
Signals/sounds end of drying cycle.
Anticrease
Prevents laundry from creasing up to 12 hours. The
automatic buzzer signal can be switch-off by selecting anti-
crease.
Delayed Start
Delays the start of the drying cycle by 1 to 12 hours.
Each time the button is pressed, the start time is delayed by
1 hour.
Then press the “Start/Départ” button to confirm the final
selection and to start the dryer.
The delayed start indicator lamp flashes and the countdown
counts down in 1-hour intervals. The countdown is indicated
by the indicator lamp above the button flashing. During the
countdown, the drum will turn from time to time to re-
distribute the laundry. To cancel or change the previously set
time delay, set the index of the programme selector knob to
the top, or open the door.
+
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht TRK 9666 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht TRK 9666 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht TRK 9666

Bauknecht TRK 9666 User Manual - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info