Manual Bauknecht Prestige 4480 (page 2 of 2) (English)

674730

Zoom out

Zoom in

1/2

5019 401 05569

Add detergent as indicated on the front page and as described in

the chapter “Detergent and Additives” in your Instructions for Use.

Turn the programme selector to the desired programme. The light

of the “Start (Pause)” button blinks. The temperature and

spin speed indicated on the display can be altered by pressing the

“Temperature” button or the “Spin” button .

When the combination of programme and additional option(s) is

not possible, the indication lights switch off automatically.

Unsuitable combinations of options are deselected automatically.

For certain programmes, an option may already be preset. If you

want you can deselect it.

“Soil level” button

• Adapts the programme duration to the soil level of your

laundry. Also influences the detergent quantity

recommendation when using the “Dosing Aid” button.

= lightly soiled - = normally soiled - = heavily soiled

Not all soil levels are selectable for each programme.

“Prewash” button

• Adds an additional prewash cycle to the wash programme

selected; prolongs the programme by about a quarter of an hour.

• Recommended for heavily soiled laundry (e.g. with sand or

granular dirt).

• Do not use liquid detergent for the main wash when activating

the “Prewash” option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water or

for washing baby linen, and helps people with allergies.

“Rinse hold” button

• Press the button if you want to postpone spinning to a later

time or if you want to drain only.

• The laundry will remain in the last rinse water without

progressing to the final spin cycle to avoid creasing and prevent

colours from changing.

• The washing machine stops to rinse hold as soon as the “Rinse

hold” symbol on the display lights up; the “Start

(Pause)” button blinks.

• Do not leave the laundry to soak in the “Rinse hold” for too long.

To terminate the “Rinse hold”:

• If you want to drain only without spinning: press the “Start

(Pause)” button to start the drain process.

• If you want to spin your laundry: press the “Spin” button

to select the desired spin speed and then “Start (Pause)” to

start the spin cycle.

“Tumble fresh”

• Select this option if you cannot unload the laundry soon after

programme end, or if you tend to forget the laundry in your

washing machine. It will help to keep your laundry fresh.

• The washing machine will start to tumble the laundry

periodically about one hour after programme end.

• The light of the “Tumble fresh” button will blink while this

function is active, and the display will show “0:01” with

blinking colon.

• The periodic tumbling will last up to approximately 12 hours

after the end of your wash programme, and you can stop it at

any time by pressing the “Tumble fresh” button. It will last a

while until you can open the door.

• After the “tumble fresh” period has run out, the display

indicates “End”.

CONSUMPTION DATA

Programme

Te m p e r a t u r e

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

without “Rapid” with “Rapid”

Mixed 40 6.0 67 0.58 1:00 —

Cotton 95 8.0 82** 2.40 2:20 —

Cotton* 60 8.0 59 0.98 4:00 2:20

Cotton* 60 4.0 42 0.78 3:10

Cotton 40 8.0 78 0.85 3:15 2:05

Cotton* 40 4.0 42 0.63 3:00

Synthetics 60 3.5 48** 0.95 1:55 1:14

Synthetics 40 3.5 45 0.53 1:40 0:59

Delicates 30 2.5 60 0.40 0:45 —

Wool/Handwash 40 2.0 49 0.63 0:40 —

White 40 8.0 77 0.80 2:20 —

Light colours 40 5.5 70 0.50 1:20 —

Dark 40 5.0 45 0.50 1:40 1:15

Super Silent 60 8.0 75 0.95 4:00 —

AquaEco 40 3.0 19 0.45 1:00 —

Speed 15 30 3.0 30 0.20 0:15 —

Jeans 40 6.0 65 0.55 1:30 1:15

Big Items 40 3.0 74 0.75 1:30 —

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the

values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption refer to the default setting of

the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

* Reference programmes for Energy Label.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.

*** Automatic adaptation of programme duration after detection of wash load.

***

ADD DETERGENTS, CLOSE THE DOOR

AND SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

“Rapid” button

• Enables quicker washing by shortening the programme duration.

• Recommendable for only lightly soiled laundry.

“Spin” button

• Every programme has a predefined spin speed. Press the

button if you want to set a different spin speed.

• If spin speed “0” is selected, the final spinning is cancelled and

the water is drained out only. However, intermediate spin

peaks remain during rinse.

The “Start delay” allows to run the machine at the consumer’s

convenience, for example at night when electricity is cheaper.

• Select programme, temperature, spin speed and options.

• Press the Start delay button to select a delay time up to 23 hours.

• Press the “Start (Pause)” button .

The countdown of the delay time begins. The clock symbol next

to the delay time and the colon between hours and minutes blink.

• The time delay indication disappears when the programme

starts and it is replaced by the remaining programme time.

• If you use the “Dosing Aid” button: select the delay time

BEFORE pressing the “Dosing Aid” button. The countdown

of the selected delay time begins after having pressed the

“Start (Pause)” button for the second time (see

separate Instructions for Use concerning the “Dosing Aid”).

To cancel the “Start delay”

...before you press the “Start (Pause)” button:

• Press the “Reset/Drain” button , or set the start delay

time to “0:00” - the delay time disappears after a few seconds.

...after having started the programme:

- Press the “Start (Pause)” button - the delay time

disappears from the display. Press “Start (Pause)” again to

start the selected programme immediately.

With the “Dosing Aid” button, you can make your washing machine

indicate you the recommended detergent quantity for your wash

load, depending on the soil level selected and the size of the load.

• Helps to save detergent and protect the environment and also

sensitive skin by avoiding detergent overdosing.

• Before you use this function, you must adapt the washing

machine to the dosing amounts which are recommended for

the detergents you use. Also check if your region’s water

hardness corresponds with the water hardness level “soft” of

your washing machine - if not adapt it.

• Select programme, options and start delay BEFORE using the

“Dosing Aid” button.

For any details, refer to the separate “Dosing Aid” Instructions for Use.

Before starting and after end of a programme, the symbol lights to

show that the door can be opened. As long as a wash programme

is running, the door remains locked and must on no account be

forced open. In case you have to open it urgently during a running

programme, refer to “Reset a running programme before the end”.

Open the tap and press the “Start (Pause)” button ; the

blinking “Start (Pause)” button light becomes constant. The

programme sequence indication shows the current programme

phase, running from left to right through wash, rinse, spin, drain. In

some phases, the remaining programme time is newly calculated -

If this is the case, the on the display will fade, and the

remaining time is replaced by an animation.

Activating the child lock prevents children from starting a wash

cycle or changing the settings of a running programme. The child

lock cannot be activated or deactivated when the programme

selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run

a programme as usual.

• Press the 2 buttons marked with the key symbol simultaneously for

a few seconds. The “Child lock” symbol will shortly blink and

then light up to indicate that the child lock is active.

The programme setting cannot be changed anymore. The only

change possible is to switch the washer off by turning the

programme selector to the “Off/O” position. To deactivate the

child lock, proceed in the same way as for activating it.

If one of the failure indications on the display lights up, refer to the

“Troubleshooting Guide” in your “Instructions for Use”.

• The display shows “End”, and the “Door open” indication

lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

• Leave the door ajar to allow the drum to dry.

• If you do not turn the programme selector to the “Off/O”

position, all lights of the control panel go out after a few

minutes to save energy - only “End” will remain on the display.

The symbol will light up at the end of the programme if you used

too much detergent. Use less detergent next time. If the symbol

lights up and the display shows “Fod”, too much foam interrupted

the wash process. Refer to the “Troubleshooting Guide” in your

Instructions for Use.

1. Press the “Start (Pause)” button to pause the

programme. The light blinks.

2. Select the new programme, temperature, any options and

another spin speed if you want.

3. Press the “Start (Pause)” button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add detergent

for this programme.

The “Reset/Drain” button cancels a programme before

the end.

•Press the “Reset/Drain” button for at least 3 seconds.

An animation appears on the display. The water is drained out.

It may last some time until you can open the door.

SET A START DELAY

DETERGENT DOSING RECOMMENDATION

“DOOR OPEN” INDICATION

PROGRAMME START

CHILD LOCK

FAILURE INDICATIONS

PROGRAMME END

DETERGENT OVERDOSAGE INDICATION

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

RESET A RUNNING PROGRAMME BEFORE

THE END

40105569GB.fm Page 2 Monday, May 23, 2011 4:31 PM

Black process 45,0° 150,0 LPI

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht Prestige 4480 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht Prestige 4480

Bauknecht Prestige 4480 User Manual - English - 12 pages

Bauknecht Prestige 4480 Installation Guide - German - 12 pages

Bauknecht Prestige 4480 Additional guide - German - 2 pages

Bauknecht Prestige 4480 User Manual - German - 11 pages

Bauknecht Prestige 4480 Installation Guide - Dutch - 12 pages

Bauknecht Prestige 4480 Additional guide - Dutch - 2 pages

Bauknecht Prestige 4480 User Manual - Dutch - 11 pages

Bauknecht Prestige 4480 Installation Guide - French - 12 pages

Bauknecht Prestige 4480 Additional guide - French - 2 pages

Bauknecht Prestige 4480 User Manual - French - 11 pages

Bauknecht Prestige 4480 Installation Guide - Italian - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bauknecht Prestige 4480 Manual

Product: