722452
14
Zoom out
Zoom in
Previous page
1/63
Next page
-14-
Remote controller
Insert the batteries into RC
1. Insert a pin and gently press down on the battery
cover and push in the direction of the arrow to
remove, as shown.
2. Insert 2 AAA batteries (1.5V) into the compartment.
Ensure that “+ and “- polarity is correctly positioned.
3. Close the battery cover on the remote control.
Remote Control presetting
Each time the batteries are replaced in the remote
controller, the remote controller pre-set at Heat Pump
mode. The heat pump AC remote controller can be used
to control the cool only AC models.
The remote control will operate the air conditioner at a
distance of up to 7m.
Use RC to control the appliance
To operate the appliance by remote control, point the
remote control at the receiving device on the indoor
unit, to ensure receiving sensibility.
To send a message from remote control, the symbol
will flash for 1 second. On receipt of the message, the
appliance will emit a beep.
Note: please follow the intruction which matches to the remote controller you receive for Air Conditioner
operation.
Function description of buttons
1.
ON OFF BUTTON
Starts and/or Stops the appliance by pressing this button.
2. MODE BUTTON
Used to select the operation mode.
3. FAN BUTTON
Used to select fan speed in sequence auto, high, medium or low.
4-5. TEMPERATURE BUTTON
Used to select the room temperature. Used to set time in timer mode and real
time clock.
6. 6th SENSE BUTTON
Sets or cancels 6th Sense operation.In this mode,temperature and fan speed are
automatically set based on the actual room temperature.
7. SWING BUTTON
Stops or starts horizontal adjustment louver swinging and sets the
desired up/down airflow direction.
8. SLEEP BUTTON
1) Short press,sets or cancels Sleep Mode operation.Sleep Mode can be set in Cooling
Heating or Dry operation mode,this function gives you a more comfortable
environment for sleep.
2) Long press,press 3 senconds to turn on or turn off display light on unit.
9. AROUND U BUTTON
Used to start or cancel Around U function.When you press this button,remote control
transmits the actual room temperature around it to the indoor unit,and the appliance
will operate according this temperature to let you feel more comfortable.
10. TIMER BUTTON
Used to set or cancel the timer on operation.
Used to set or cancel the timer off operation.
11. SILENT BUTTON
Used to set or cancel the Silent operation.Press silent button to let the unit operate at low noise level to get quiet and
comfortable room environment.
Note:Under extreme environmental conditions,it is possible to notice a temporary slight increase in noise due to the need of reaching the comfort
temperature quickly.
Symbols on RC display
Cooling indicator Auto fan speed 6th Sense indicator Signal transmission
Dry indicator High fan speed Sleep indicator Display set timer
Fan only indicator Medium fan speed Around U indicator Display set temperature
Heating indicator Low fan speed Silent indicator
Signal receptor
Silent
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht PACW29HP BK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht PACW29HP BK in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info