498952

Bauknecht KMT 9145 PT Manual

36
Zoom out
Zoom in
Previous page
1/298
Next page
GB34
When the machine is ready for use, you can access the menu in order to change the following parameters or functions:
•RINSING
•SETTING THE CLOCK
•LANGUAGE
•AUTO START
•DESCALING
• COFFEE TEMPERATURE
• AUTO OFF
•WATER HARDNESS
•RESET TO DEFAULT
•STATISTICS
• SETTING THE TONE
•EXIT
Setting the language
To change the display language, proceed as follows:
• Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) to select LANGUAGE.
• Press OK (B7).
• Press buttons (B5) and (B6) until the required language is displayed.
• Press OK (B7) to confirm.
• Press the MENU button (B2) to exit the menu.
Rinsing
This function is used to obtain hotter coffee. Proceed as follows:
• If, when you turn the machine on, you select a small cup of coffee (less than 60ml), use the hot water from the rinse cycle
to pre-heat the cup.
• If, on the other hand, more than 2/3 minutes have elapsed since the last coffee was made, pre-heat the brewing unit
before making any more coffee. To do so, press the MENU button (B2) to access the menu; the display shows the message
RINSING. Press OK (B7). The display shows OK TO CONFIRM. Press the OK button (B7) again. Let the water run into the
drip tray below or use it to fill (and then empty) the cup to be used for coffee, thus warming it.
Changing the duration of operation
The appliance is factory-set to switch off automatically after 30 minutes of inactivity. To change this time (max 120 min.), proceed
as follows:
•Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) until the display shows the message AUTO OFF.
• Press OK (B7) to confirm.
• Press buttons (B5) and (B6) to set the period of time after which the appliance must switch off (30 minutes, 1 hour, 2 hours).
• Press OK (B7) to confirm.
• Press the MENU button (B2) to exit the menu.
Setting the clock
• Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) until the display shows the message
SET CLOCK.
• Press OK (B7).
• To set the hours, use buttons (B5) and (B6) then press OK (B7) to confirm.
• To set the minutes, use buttons (B5) and (B6) and then press OK (B7) to confirm.
• Press the MENU button (B2) to exit the menu.
Setting automatic start time
This function allows you to set the machine to switch on automatically at a time of your choosing.
• Make sure the appliance clock has been set.
• Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) until the display shows the message
AUTO START DEACTIVATED.
• Press OK (B7).
• The machine displays the message AUTO START ACTIVATE?.
• Press OK (B7) to confirm.
• The display shows AUTO START 07:30.
• To set the auto start time, use the buttons (B5) and (B6) then press OK (B7) to confirm.
• To set the minutes, use buttons (B5) and (B6) and then press OK (B7) to confirm.
• Press OK (B7), the display shows AUTO START ACTIVATED.
• Press the MENU button (B2) to exit the menu. The display shows the symbol next to the time.
CHANGING AND SETTING MENU PARAMETRS
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht KMT 9145 PT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht KMT 9145 PT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 59,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info