Manual Bauknecht HIR4 EP8V2 PT (page 19 of 84) (English, German, Dutch, French, Italian, Spanish)

724353

Zoom out

Zoom in

1/84

.FAST PREHEATING

Turn the selection knob to the symbol to select the

fast preheating function and confirm by pressing the

selection/confirmation button: the settings are shown

on the display. If the proposed temperature is that

desired, press the selection/confirmation button. To

change the temperature, proceed as described in

previous paragraphs.

PRE

Once this phase has finished, an audible signal will

sound and the display will indicate that the oven has

reached the set temperature.

At this point, open the door, place the food in the

oven, close the door and start cooking.

At the end of preheating, the oven automatically

selects the conventional function: If you wish to set

a different cooking function, turn the selection knob

and select the desired function.

Please note: Placing the food in the oven before preheating

has finished may have an adverse effect on the final cooking

result. Opening the door during the preheating phase will

stop pause it.

The cooking time does not include a preheating phase.

You can always change the temperature you want the oven

to reach using the adjustment knob.

5. END OF COOKING

An audible signal will sound and the display will

indicate that cooking is complete.

Press the selection/confirmation button to continue

cooking in manual mode (without a programmed

cooking time) or turn the adjustment knob to extend

the cooking time by setting a new duration.

BROWNING

Some functions of the oven enable you to brown

the surface of the food by activating the grill once

cooking is complete.

PRESS

When the display shows the relevant message, if

required press the selection/confirmation button to

start a five-minute browning cycle.

You can stop the function at any time by turning the

selection knob to to switch the oven off.

. TIMER

When the oven is switched off, the display can be

used as a timer. To activate this function, make sure

that the oven is switched off and turn the adjustment

knob: The icon will flash on the display.

Turn the adjustment knob to set the length of time

you require and then press the selection/confirmation

button to activate the timer. An audible signal will

sound and the display will indicate once the timer has

finished counting down the selected time.

Please note: The timer does not activate any of the cooking

cycles. Use the adjustment knob to change the time set on

the timer; turn the selection knob to to switch the timer

off at any time.

COOKTOP OPERATION

(see the instructions supplied with the cooktop).

The oven control panel features 4 adjustable knobs

for cooktop operation.

The cooktop control knobs are marked with a

numerical scale corresponding to different power

settings, and a series of function symbols.

Please note: The multizone function can only be switched on

for the double and triple hotplates of the cooktop.

• Turn the control knob of the relevant hotplate

clockwise to the desired power setting.

Kako resetovati pecnicu Bauknecht HIR4 EP8V PT na tvornicke postavke, pokazuje grešku F3. Molim za pomoc. Veliko hvala. Submitted on 29-9-2021 at 14:02
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht HIR4 EP8V2 PT in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 73.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht HIR4 EP8V2 PT

Bauknecht HIR4 EP8V2 PT User Manual - English - 12 pages

Bauknecht HIR4 EP8V2 PT User Manual - German - 12 pages

Bauknecht HIR4 EP8V2 PT User Manual - Dutch - 12 pages

Bauknecht HIR4 EP8V2 PT User Manual - French - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bauknecht HIR4 EP8V2 PT Manual

Product: