572382
8
Zoom out
Zoom in
Previous page
1/15
Next page
12
Before using the dishwasher/Connections
1. Removing the packaging
and controls:
After unpacking, make sure
that the dishwasher is
undamaged and that the door
closes correctly. If in doubt,
contact a qualified technician
or your local retailer.
Keep the packaging
materials (plastic bags,
polystyrene parts, etc.) out of
reach of children, as they are
potentially dangerous.
This dishwasher has been
factory tested to ensure it
functions correctly.
Such testing may leave slight
water marks that will
disappear with the first wash.
2. Water and electrical
connections:
All water and electrical
connections must be carried
out by a qualified technician
in compliance with the
manufacturer's instructions
(refer to the enclosed
installation booklet) and
current local safety
regulations.
The appliance must only be
used in the household for
the prescribed uses.
Do not use the dishwasher if it
has been damaged in transit.
Consult your local retailer or
our After-Sales Service.
(Refer to the separate
installation instructions
booklet)
3. Water inlet and drain:
Observe any special
regulations issued by your
local Water Board.
Water supply pressure:
0.3 - 10 bar.
Make sure the inlet and drain
hoses are kink-free and are
not crushed.
If the hose length is not
sufficient, please contact
your local dealer or our
After-Sales Service.
The inlet hose must be
securely clamped to the
water tap to prevent leaks.
The inlet water temperature
varies according to the model
installed. Inlet hose marked
“25° C Max”: maximum
temperature 25° C.
All other models: maximum
temperature 60° C.
When installing the
appliance, make sure the
drain water discharges
correctly (if necessary,
remove the wire gauze from
the sink siphon).
Fix the drain hose to the spigot
with a clamp to prevent it from
coming off during operation.
For appliances with water-stop
system only: If the water
connections are made
correctly, the water-stop
system safeguards your home
against damage caused by
flooding.
4. Electrical connection:
Closely adhere to local
Electricity Board regulations.
Voltage information is shown
on the rating plate mounted
inside the door on the right
hand side.
The appliance must be
earthed as prescribed by law.
Do not use extension leads or
multiple adapters.
Before carrying out
maintenance, disconnect the
mains plug.
If necessary, the power cable
may be replaced with one the
same obtained from our
After-Sales Service. The
power cable must only be
replaced by a qualified
technician.
Warning for models
provided with LCD display:
The mains plug must be
positioned in an easily
accessible place.
For Austria:
if the apparatus
is series connected to a fault
current switch, this must be
sensitive to the pulsating
current.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht GSU 4591 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht GSU 4591 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht GSU 4591

Bauknecht GSU 4591 User Manual - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info