122979
4
Zoom out
Zoom in
Previous page
1/4
Next page
BK/IV/GB
What to do if...
If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the
problem (* see also the corresponding chapter in the user instructions).
Problem Cause Remedy
The appliance is not
working
No water supply. Open the tap.
The appliance does not load
sufficient water.
Clean the water supply tap filter.
Ensure there are no kinks in the water hose.
There is a power failure. Insert the plug into the mains socket.
Press the Start button.
Close the door.
Check the domestic circuit fuse.
Starting the selected programme. The programme can be set to “0” to start.
If crockery is not
perfectly dry
Insufficient rinse aid. Increase dosage *.
Residual water in cavities. Load crockery at an angle.
If crockery is not
perfectly clean
The water jet does not reach the
crockery.
Arrange crockery so that items do not touch
each other. Load crockery upside down.
Insufficient detergent. Follow recommended detergent dosage.
Unsuitable programme. Select a more intense wash cycle.
Spray arms blocked. The spray arms must be able to turn freely.
Spray arm nozzles clogged. Remove any impurities obstructing the water
flow *.
Incorrect detergent/detergent too
old.
Use a good quality detergent.
Sandy or grainy
residues
Clogged filters. Check filters regularly/if necessary clean *.
Filters incorrectly assembled. Insert the filter correctly *.
Colour of plastic
parts faded
Tomato/carrot juice... Depending on the material, if necessary use a
detergent with a greater whitening power.
Deposits on crockery
•removable Streaks on the crockery/glasses. Increase the rinse aid dosage *.
Streaks on glasses. Reduce the rinse aid dosage *.
Layer of salt on crockery/glasses. Close the salt container lid properly*.
not removable Insufficient water softening,
calcium deposits.
Change water hardness setting, if necessary
add salt *.
Opaque glasses/
glasses not sparkling
Cannot be washed in the
dishwasher.
Use suitable glasses.
Rust on cutlery
Not made of stainless steel. Use suitable cutlery.
Identifying
appliance faults
The START indicator lamp flashes.
Indicator F... (if provided).
Ensure the filter assembly is not clogged and
that there is no interruption to the water
supply (if necessary, clean the filters *).
Start the programme again. Press the START
button for 2 seconds, until the START indicator
lamp switches off. Select a new programme
and press the Start button again.
If after carrying out the above checks the malfunction persists or appears again, turn the appliance off
and turn off the water supply tap, then call our After-Sales Service (see guarantee).
Before contacting our After-Sales Service, take note of the following:
The nature of the fault.
The appliance type and model.
The service code (the number indicated on the adhesive rating
plate) inside the door on the right-hand side.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht gsi 6598 in at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht gsi 6598 in in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht gsi 6598 in

Bauknecht gsi 6598 in Quick start guide - German - 4 pages

Bauknecht gsi 6598 in User Manual - Dutch - 4 pages

Bauknecht gsi 6598 in Quick start guide - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info