After connecting the appliance to the power supply, the device must be programmed. The display will guide the user to set up the appliance for first use.
1.The language selection
2.Setting the water hardness
3.Filling the salt reservoir
ENGLISH?
P =NO,fflst =YES
To select preferred language please press button. Confirm pressing button.
After language confirmation, the appliance will go through the settings.
WATER HARDNESS
<1=Min, 7=Max>
The water hardness is by default set to level
4. To change water hardness level press
button repeatedly.
To confirm your choice press button.
The level must be set according to the table
below.
Detergents
When using Powder or Gel you must add
regeneration salt and set up water hardness
level as indicated in the table below.
WATER HARD.= 4
P =NO,fflst =YES
Also, when using Tablets which include salt
functionality you must still add regeneration
salt.
1.Ask your water supply company what the water hardness is...2.... enter this value on your dishwasher
SALT required
German
degrees °dH
French
degrees °fH
English
degrees °eH
Water hardness levelInsert value is shown in the display
0 - 50 - 90 - 6.3Soft1NO
6 - 1010 - 187 - 12.6Medium2
YES
11 - 1519 - 2713.3 - 18.9Average3
16 - 2128 - 3719.6 - 25.9Medium-hard4
22 - 2838 - 5026.6 - 35Hard5
29 - 3551 - 6335.7 - 44.1Very hard6
36 - 5064 - 9044.8 - 62.4Extremely hard7
POUR WATER
OPERATION
When water hardness is set, it is required to fill salt reservoir with water and special regeneration salt.
As a first step it is needed to fill reservoir with 1.5 litres of fresh water.
Confirm operation by pressing button.
INSERT 1,5L OF
fflst = DONE
WATER IN THE
fflst = DONE
SALT RESERVOIR
fflst = DONE
INSERT SALT
OPERATION
ADD 1KG OF
fflst = DONE
SALT IN THE
fflst = DONE
SALT RESERVOIR
fflst = DONE
Unscrew cap.
Fill the salt reservoir with water.
Add 1kg of special regeneration salt dedicated only
for dishwashers. Other kind of salt cannot be used.
Screw on the cap.
Salt residue around the cap needs to be removed. Residual saline solution or
grains of salt can lead to deep-down corrosion, irreparably damaging the
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bauknecht GSI 5994 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bauknecht GSI 5994 in the language / languages: English as an attachment in your email.
The manual is 8,94 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.