124968
3
Zoom out
Zoom in
Previous page
1/10
Next page
14
Check the water hardness level in your
area.
Consult your local Water Board or check
your last water bill.
Set the water hardness by turning the
selector (if fitted) inside the door (top left)
with a screwdriver. Use the table below to
set the dial to the required setting.
If the water hardness level falls within category 1
(soft), no salt is required.
If the water hardness level exceeds
category 1-2 (medium), before using the
dishwasher for the first time, fill the salt
container and run a wash cycle so that
any excess saline solution discharged is
immediately removed by the water to
prevent corrosion. The pre-rinse cycle is
not sufficient for this purpose.
Check the salt level regularly.
Important: Only use regeneration salts
recommended for use in domestic
dishwashers.
Do not fill the salt container with
detergent as this will cause irreparable
damage to the water softener system.
To fill the salt container:
1.
Remove the lower rack.
2.
Unscrew the cap by turning it counter-
clockwise.
3.
If the dishwasher is new, fill the salt container
to the rim with water.
4.
Fill the container to the rim with salt
(max. 2 kg) and stir with a spoon handle.
5.
Screw the cap back on by turning it
clockwise.
Salt level indicator
The dishwasher is equipped with an electric or
visual salt level indicator depending on the
model installed.
Electric indicator:
The salt level indicator lamp on the control
panel illuminates when the salt container is
empty.
Visual indicator:
The red float is clearly visible in the cap window
when the salt container is full. The red float
lowers and is no longer visible when the salt
container is empty.
HOW TO FILL THE SALT CONTAINER
Selector
setting
Water
hardness
German
degrees °dH
French
degrees °fH
0 1 soft 0 - 5 0 - 9
1 1 - 2 medium 6 - 10 10 - 18
2 2 medium 11 - 15 19 - 27
3 3 medium-hard 16 - 21 28 - 37
4 4 hard 22 - 28 38 - 50
5 4 very hard 29 - 35 51 - 63
6
4 extremely
hard
36 - 60 64 - 107
94017-gb.fm5 Page 14 Wednesday, September 26, 2001 6:15 PM
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht gsi 4033 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht gsi 4033 3 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht gsi 4033 3

Bauknecht gsi 4033 3 Quick start guide - English - 2 pages

Bauknecht gsi 4033 3 Quick start guide - German - 2 pages

Bauknecht gsi 4033 3 User Manual - German - 9 pages

Bauknecht gsi 4033 3 User Manual - Dutch - 7 pages

Bauknecht gsi 4033 3 User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info