75546
11
Zoom out
Zoom in
Previous page
1/38
Next page
12
Before using the glass ceramic hob
To ensure best use of your new
appliance, please read the
operating instructions carefully
and keep them at hand in case of
need.
Installation
Cooking hob
Fit the cooking hob in a
worktop of thickness 30 mm
- 50 mm
Do not place materials
between the hob and oven
(crosspieces, brackets, etc.).
The distance between the
bottom of the glass ceramic
hob and the cabinet or
separating panel must be at
least 25 mm.
If a column unit is to be
installed next to the hob, it
must be kept at least 100 mm
from the edge of the hob.
Make an opening in the worktop,
respecting the dimensions
indicated in the enclosed product
sheet.
Apply the seal supplied around
the hob (unless it has already
been fitted), after cleaning the
surface.
Important
In order to prevent overheating and
related damaging of the electronic
circuits:
Do not install the hob near a
dishwasher or washing
machine, so that the
electronic circuits do not
come into contact with
steam or moisture which
could damage them.
Make sure that the oven
(manufactured by us) has a
cooling fan to protect the
electronic parts
as much as
possible if the hob is
installed above it.
If the temperature of the electronic
circuits exceeds the maximum
permissible value, the hob will
automatically switch off; in this case,
wait a few minutes until the internal
temperature of the electronic
circuits reaches a tolerable level,
when the hob can be switched on
again.
When combining a 900 mm hob and
a 600 mm oven (which must be
manufactured by us and with cooling
fan), access to the bottom of the hob
must be prevented by interposing a
separator.
Do not forget to switch off the
hob. If you inadvertently
forget to do so, the hob has an
automatic switching off device
which is activated after 1 to 6
hours of operation, depending
on the cooking level selected.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht ETPV 6950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht ETPV 6950 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 22,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht ETPV 6950

Bauknecht ETPV 6950 User Manual - German - 7 pages

Bauknecht ETPV 6950 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info