Manual Bauknecht EMEK7CP545 (page 4 of 10) (English)

703821

Zoom out

Zoom in

1/10

FIRST TIME USE

1. SELECT THE LANGUAGE

You will need to set the language and the time when

you switch on the appliance for the first time:

“English” will show on the display.

1. English

Turn the adjustment knob to scroll through the list of

available languages and select the one you require.

Press to confirm your selection.

Please note: The language can subsequently be changed by

selecting “LANGUAGE” in “SETTINGS” menu, available by

turning the selection knob.

2. SET THE TIME

After selecting the language, you will need to set the

current time: The two digits for the hour will flash on

the display.

CLOCK

Turn the adjustment knob to set the current hour and

press : The two digits for the minutes will flash on

the display.

Turn the adjustment knob to set the minutes and

press to confirm.

Please note: You may need to set the time again following

lengthy power outages. Select “CLOCK” in “SETTINGS” menu,

available by turning the selection knob.

3. HEAT THE OVEN

A new oven may release odours that have been left

behind during manufacturing: this is completely

normal. Before starting to cook food, we therefore

recommend heating the oven with it empty in order

to remove any possible odours.

Remove any protective cardboard or transparent film

from the oven and remove any accessories from

inside it. Heat the oven to 200 °C for around one hour,

using the “Fast Preheat” function. Follow the

instructions for setting the function correctly.

Please note: It is advisable to air the room after using the

appliance for the first time.

MY FAVORITES

For retrieving the list of 10 favorite functions.

DIAMOND CLEAN

The action of water vapor released during this special

cycle of cleaning by means of a low temperature,

facilitates removal of grime. Place 200 ml of drinking

water on the bottom of the cavity and activate the

function when the oven is cold.

SETTINGS

For adjusting the oven settings.

When “ECO” mode is active the brightness of the display will

be reduced to save energy and lamp switches off after

1 minute.

When “DEMO” is “On” all commands are active and menus

available but the oven doesn’t heat up. To deactivate this

mode, access “DEMO” from “SETTINGS” menu and select “Off”.

By selecting “FACTORY RESET”, the product switches off and

then it returns to first switch on. All settings will be deleted.

HOW TO READ THE COOKING TABLES

The tables list:

recipes , if preheating is needed , temperature ,

microwave power , grill level , weight cooking time

, accessories and level suggested for cooking.

Cooking times start from the moment food is placed in the

oven, excluding preheating (where required).

Cooking temperatures and times are approximate and

depend on the amount of food and the type of accessory

used.

Wire Shelf, cake tin on wire shelf, baking tray,

glass tray

My Bauknecht combi-oven doesn't work anymore and comes with error code F1E 3. does anybody has the solution?
Thanks,
Bas Boon Submitted on 2-1-2023 at 09:55
Reply Report abuse
Mijn Bauknecht oven EMEK7 CP545 PT geeft een error code, een functiestoring: F 1E 3
Hij doet het niet dus. Weet iemand er een oplossing voor? Resetten of zo? Bij Instellingen kan ik komen, ook bij resetten, maar als ik dat dan doe gaat het schermpje weer naar de beginstand zonder resultaat. Graag uw hulp want hun service is duur, zeker voor zo'n nieuw apparaat van ruim 2 jaar.
Vr. groet, Bas Boon
Bas Boon
Submitted on 1-1-2023 at 18:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht EMEK7CP545 in the language / languages: English as an attachment in your email.

The manual is 9,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht EMEK7CP545

Bauknecht EMEK7CP545 User Manual - German - 10 pages

Bauknecht EMEK7CP545 User Manual - Dutch - 10 pages

Bauknecht EMEK7CP545 User Manual - French - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bauknecht EMEK7CP545 Manual

Product: