662983
27
Zoom out
Zoom in
Previous page
1/36
Next page
GB25
USING THE ELECTRONIC PROGRAMMER
Description of Functions
Using the oven for the first time
Setting the time of day and the tone of the acoustic signal.
Upon connection of the oven to the mains power supply, AUTO and 0.00 flash on the display. To set the
time of day, press buttons - and + at the same time: the two central dots flash. Set the time of day using the
buttons + and -. Having selected the desired value, press the middle button. The display shows “ton 1”. To
select the desired tone, press button -. Having selected the preferred tone, press the middle button. To
change the time of day, proceed as described above.
Setting cooking time
After selecting the cooking mode and temperature using the knobs, press the middle button: the display
shows 0.00 and the bell symbol flashes. Press the middle button again: on the display and 0.00 appear
in sequence and AUTO flashes. Set cooking time using the buttons + and - (the maximum programmable
value is 10 hours). After a few seconds the display shows the time of day and AUTO remains lit, confirming
the setting. To view the remaining cooking time and change it if necessary, press the middle button for 2
seconds and then press it again a second time. At the end of the set time, the symbol switches off, the
alarm sounds and AUTO flashes on the display. Press any button to deactivate the alarm. Return the
functions and temperature knob to zero and press the middle button for two seconds to end cooking.
Delaying cooking end time
After selecting cooking time, press the middle button: the display shows , cooking end time and AUTO
flashing in sequence. Press the button + to view the desired cooking end time (cooking can be delayed by
a maximum of 23 hours and 59 minutes). After a few seconds the display shows the time of day, the
symbol switches off and AUTO remains lit, confirming the setting. To view cooking end time and
change it if necessary, press the middle button and then press it again twice. At the end of the countdown,
the symbol lights up and the oven proceeds with the selected cooking mode.
Setting the timer
To set the timer, long-press the middle button: the display shows 0.00 and the bell symbol flashes. Set the
timer using the button + (the maximum programmable value is 23 hours and 59 minutes). The countdown
begins after a few seconds. The display shows the time of day and the bell remains lit, confirming the timer
has been set. To view the countdown and change it if necessary, press the middle button again.
1. Button - : to decrease the value shown on the display
2. Button : for selecting the various settings:
a. Timer
b. Cooking time
c. Cooking end time setting
3. Button + : to increase the value shown on the display
A. The symbol indicates that the timer function is in operation
B. The AUTO symbol confirms the setting has been made
A
U
T
O
2 31
A
B
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht EMCK 7263 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht EMCK 7263 in the language / languages: English, German as an attachment in your email.

The manual is 7,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info