806836
5
Zoom out
Zoom in
Previous page
1/5
Next page
5019 418 33073
D F NL E
GB PIGR
SAFEGUARDING THE ENVIRONMENT
1. Packing
Packing materials are 100% recyclable and are marked with the
recycling symbol .Comply with the local regulations for their
disposal. Packing materials (plastic bags, polystyrene, etc.) are are a
potential source of danger, therefore keep them out of the reach of
children.
2. Appliance
This appliance is marked in compliance with European Directive
2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
By ensuring that this appliance is correctly scrapped, the user can
help prevent potentially negative consequences for the environment
and the health of persons.
The symbol on the product or the accompanying documentation
indicates that this product should not be treated as domestic waste
but must be taken to a suitable collection centre for the recycling of
electrical and electronic equipment.
Disposal must be carried out in compliance with local regulations on
waste disposal.
For further information on the treatment, recovery and recycling of
this product, contact the competent local authority, the domestic
waste collection service or the shop where the product was
purchased.
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
CAUTION!
Children or infirm persons must not operate the
appliance without supervision.
Make sure children do not play with the appliance.
1. Do not connect the appliance to the power supply until
installation is completed; disconnect the hood from the mains
before performing any cleaning or maintenance.
2. Do not cook food “flambé” under the hood. Naked flames could
cause a fire.
3. Do not leave pans unattended when frying, as the cooking oil
could catch fire.
4. Regular cleaning and maintenance guarantees good hood
operation and performance. Regularly remove all grime
deposits. Regularly clean or replace the filter. Do not use
flammable materials for the ducting of exhausted air.
5. If the hood is used together with other non-electric appliances,
the negative pressure in the room must not exceed 4Pa
(4 x 10 -5 bars). Make sure the room is adequately ventilated.
Electrical connections
Before connecting the hood to the power supply, make sure the
voltage specified on the dataplate matches that in your home. The
dataplate is located inside the hood behind the grease filter.
If the appliance is fitted with a power cable and plug, the plug must
be placed in an accessible position.
If the hood is not provided with a plug, use one that complies with
current standards or use a double-pole switch, complying with
current regulations, with a minimum contact opening gap of 3 mm.
Replacement of the power cable with plug or flexible cable can only
be carried out by the "Assistance Service" or by qualified personnel.
Cleaning the hood
Warning! Failure to remove oil/grease (at least once a month) could
cause a fire.
Use a soft cloth with a neutral detergent. Never use abrasive
substances or alcohol.
Before using the hood
Please read these instructions carefully and keep them for future
reference, in order to ensure best use of your hood.
Packing materials (plastic bags, polystyrene, etc.) are are a potential
source of danger, therefore keep them out of the reach of children.
Make sure the hood has not been damaged during transport.
Installation, electrical connections and replacement of the power
cable with plug or flexible cable must be carried out by a qualified
technician in compliance with the current local regulations.
Declaration of conformity
This product has been designed, manufactured and put on the
market in conformity with the following:
- safety objectives of "Low Voltage" Directive 73/23/EEC
- protection requirements of “EMC” Directive 89/336/EEC
amended by Directive 93/68/EEC.
Troubleshooting guide
The hood does not work:
Is the plug properly inserted in the power socket?
Is there a power failure?
Is the fuse blown?
The hood is not extracting efficiently:
Is the right speed selected?
Do the filters need cleaning or replacing?
Are the air outlets blocked?
The light does not work:
Does the bulb need replacing?
Is the bulb correctly fitted?
Is the fuse blown?
AFTER-SALES SERVICE
Before calling the Assistance Service
1. Check if you can fix the problem yourself (see ”Troubleshooting
guide”).
2. Switch the hood off and then on again to check if the problem
has gone.
3. If the problem persists, call the Assistance Service.
Specify:
the type of fault,
the product model given on the dataplate located inside the
hood and visible on removing the grease filters.
your full address,
your telephone number and area code.
the Service code (the number appearing below the word
SERVICE on the dataplate inside the hood behind the grease
filter).
Should any repairs be necessary, contact an authorised Technical
Assistance Centre (to ensure original spare parts are used and that
repairs are carried out correctly).
Failure to comply with these instructions can compromise the safety
and quality of the product.
41833073.fm Page 8 Monday, October 24, 2005 12:18 PM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht DE 5360 SG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht DE 5360 SG in the language / languages: English as an attachment in your email.

The manual is 0.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht DE 5360 SG

Bauknecht DE 5360 SG User Manual - German - 5 pages

Bauknecht DE 5360 SG User Manual - Dutch - 5 pages

Bauknecht DE 5360 SG User Manual - French - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info