591898
8
Zoom out
Zoom in
Previous page
1/8
Next page
GB16
1. Hood body
2. Extraction panel
3. Lighting
4. Grease filters
5. LED indicator light
6. Wall mounting.
7. Extraction panel fixing pins
8. Safety sliders
9. Remote control
Remote control
The remote control must be recognized by the hood through the following procedure:
Hood and remote control pairing procedure
Press the "" or "" button until the remote control shows the symbol
Press the middle button "" for 5 seconds.
At this point, the pairing procedure is completed and the hood is configured to operate with the remote control.
Hob light ON/OFF:
Press the "" or "" button until the remote control shows the symbol
Press the "+" button to switch the lights on.
Press the "-" button to switch the lights off.
Press the button "" to change light status from off to on and vice versa.
Extraction power selection:
Press the "" or "" button until the remote control shows the symbol
Press the "+" button, "-" button or the button "" respectively to increase, decrease or switch off (standby) the extraction
power.
N.B.: during hood operation, the LED remains on; it will switch off as soon as the motor status changes to OFF.
Filter RESET
The hood is fitted with a device indicating when the grease filter needs to be changed.
Grease filter saturation is indicated (while the hood is off) by means of the LED flashing.
To reset the function, press and hold the "" button, while the motor is switched off, for 3 seconds.
Remote control maintenance
Remote control cleaning:
Clean the remote control with a soft cloth and neutral detergent solution free of abrasive substances
Replacing the battery:
Open the battery compartment by prising with a small flathead screwdriver.
Replace the exhausted battery with a new 12 V MN21/23 one. When inserting the new battery, observe the polarities marked on the battery compartment!
Close the battery compartment.
Disposal of batteries
The batteries must be disposed of in compliance with all national laws and regulations.
Do not throw away used batteries together with normal waste. The batteries must be disposed of safely.
For further information regarding environmental protection, recycling and disposal of batteries, contact the offices in charge of differentiated collection.
DESCRIPTION AND USE OF THE HOOD
3
4
5
6
2
7
8
1
9
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht DDR 5010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht DDR 5010 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht DDR 5010

Bauknecht DDR 5010 User Manual - German - 8 pages

Bauknecht DDR 5010 User Manual - Dutch - 8 pages

Bauknecht DDR 5010 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info