T1. Motor ON/OFF button (stand by) – resets the lter saturation indicators
T2. ON button – speed selection (extraction power) for low speed
T3. Speed selection button (extraction power) for normal speed
T4. Speed selection button (extraction power) for high speed and Intensive setting.
Press to activate high speed (extraction power).
Press again to activate the Intensive speed setting (extraction power) (button ashes for 5 minutes, after which it returns to normal speed (extraction power).
T5. “Anti-condensation function” ON/OFF button: Prevents condensation from forming on the surface of the hood. Activate as required.
“Automatic anti-condensation function”: The hood activates this function each time the hood is switched on.
Automatic ON/OFF activation: With the hood switched o, press and hold the button (for around 3 seconds until a “beep” signal sounds) to activate or
deactivate this function.
Please note: The anti-condensation function must only be activated when the motor is switched on.
Warning! Even if this function is never activated, carry out periodic maintenance of the condensation pan all the same, as indicated in the
“Maintenance – Cleaning – Maintenance of the condensation pan” section.
T6. Light ON/OFF button.
Filter saturation indicators
At regular intervals, the hood signals the need to perform lter maintenance.
Please note: The indicators are activated when the hood is switched on.
Flashing T2 button: Carry out maintenance on the grease lter.
Flashing T3 button: Carry out maintenance of the active carbon lter.
Please note: The lter saturation signal is visible within the rst minute after the hood has been switched o; after this time, the saturation indicators are reset.
Filter saturation indicator reset:
Please note: This action is carried out with the hood switched on.
Press and hold the T1 button.
Active carbon lter saturation indicator activated
Please note: This action is carried out with the hood switched o.
This indicator is usually deactivated; simultaneously press and hold the T2 and T3 buttons to activate the function: The T3 button lights up to indicate activation.
To deactivate the function, simultaneously press and hold the T2 and T3 buttons: The T3 button ashes briey and then goes out to indicate deactivation.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bauknecht DBHVS 82 LT K at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bauknecht DBHVS 82 LT K in the language / languages: English as an attachment in your email.
The manual is 3.12 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
