After connecting the hob to the electrical power supply, the control panel is locked. To unlock the control panel touch . The led on the display switches off
and the hob can be used. Read the “Control panel lock” paragraph for more details.
Switching the hob ON/OFF
To switch the hob on, touch the control until the cooking zone displays light up. To switch off, touch the same control until the displays switch off. All the cooking
zones are deactivated. If within 30 seconds of switching on, no function is selected, the hob switches off automatically.
Switching on and adjusting cooking zones
Place the pot on the cooking zone, switching the hob on, activate the required cooking zone by touching the
corresponding “-” or “+” controls: “5” will appear on the display. With “-” and “+” controls it is possible to select the
required power level, from min. 0 to max. 9.
Deactivation of cooking zones
To switch off the cooking zone, touch simultaneously the control “-” and “+” or select the level “0” with the control “-”.
The cooking zone switches off and, if still hot, the letter “H” appears on the zone display.
Control panel lock
This function locks the controls to prevent accidental activation of the hob. To activate the control panel lock touch an acoustic signal sounds and a
luminous indicator appears on the display. The control panel is locked except for the switching off function. To deactivate the control panel lock, repeat the
activation procedure.
The presence of water, liquid spilled from pots or any objects resting on the controls can accidentally activate or deactivate the control panel lock.
Timer
The timer can be used to set the cooking time for a maximum of 99 minutes (1 hour and 39 minutes) for all the cooking zones. Select the cooking zone to be
used, touch the timer “-” or “+” controls and a beep signals the function. The display shows “00”. The Timer value can be decreased and increased by keeping
the nger on the controls “+” or “-”. After the Timer value selection, the display continue to blink for 10 seconds before the countdown starts.
When the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically. To deactivate the timer, select the cooking zone,
touch the Timer controls “-” and “+” simultaneously.
IMPORTANT:
-The dot blinking next to the power level display shows that the Timer function is active on that zone.
-The Timer is available for all the zones but one at a time.
Residual heat indicator.
These indicators alert the user when cooking zones are still hot.
If the display shows , the cooking zone is still hot. If the residual heat indicator of a given cooking zone is lit, that zone can be used, for example,
to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes off.
Special function
Some models have special functions:
Button
Function
Name
Visual
Indication
Description
Dual/Triple
zone
The control activates the double or triple zone (if
available). After positioning the pot/accessory on the
chosen cooking zone, switch on the hob and select the
cooking zone. Select the power level and touch the
control one time to activate the dual zone or two times to
activate the triple zone. To deactivate the function,
simply touch the same button. LEDs above the controls
are switched on only when the function is active for the
selected zone.
Boiling
Display shows:
Melting
Display shows:
This function sets a power level that is suitable for slowly
melting delicate products without compromising their
sensorial quality (chocolate, butter, etc.). After
positioning the pot/accessory on the chosen cooking
zone, switch on the hob, select the cooking zone and
touch the melting control. To deactivate the function,
simply press the same button or touch "-" and "+" to
switch o the zone. It is possible to use this function in
combination with dual/triple zone function.
This function sets the zone maximum power (for
example to quickly bring water to the boil). After
positioning the pot/accessory on the chosen cooking
zone, switch on the hob, select the cooking zone and
touch the boiling controls. After 10 minutes of usage of
this function, the appliance automatically sets the zone
to level 9. To deactivate the function simply touch the
same control or lower the power level with "-". It is
possible to use this function in combination with dual/
triple zone function.
Power indicator display
Selected cooking zone indication
(the dot blinks when there is a Timer active on that zone)
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bauknecht CTAR8743 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bauknecht CTAR8743 in the language / languages: English as an attachment in your email.
The manual is 2,04 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
