572525
11
Zoom out
Zoom in
Previous page
1/20
Next page
GB30
SETTING END OF COOKING TIME /START DELAYED
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only
be done once cooking time has been set. This setting is only possible when pre-heating is not required for the selected
function.
After setting cooking time, the display shows the end of cooking time (for example 19:20). To delay the end of cooking time, and
thus also the cooking start time, proceed as follows:
1. Position the cursor next to the end of cooking time using buttons .
2. Press button to select the setting: the end of cooking time flashes.
3. To delay the end of cooking time, use buttons and to set the desired value.
4. Confirm the selected value by pressing button .
5. Press button . The display indicates which shelf food should be placed on.
6. Press button to activate the function. The oven will start cooking after a period of time calculated so as to finish
cooking at the set time (for example, in the case of a dish which requires a cooking time of 20 minutes, if the end of
cooking time is set to 20.10, the oven will begin cooking at 19.50).
N.B: during the interval before cooking starts, the oven can in any case be switched on by pressing button .
At any time during cooking, set values (temperature, grill setting, cooking time) can be changed using buttons
and button as described in previous paragraphs.
INDICATION OF THE RESIDUAL HEAT INSIDE THE OVEN
If at the end of cooking, or when the oven is switched off, the temperature inside the oven is over 50°C, the display shows the
current temperature and the bar indicating cooling in progress. When the residual heat reaches 50°C, the display shows the
current time.
TIMER
This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta.
The maximum time which can be set is 1 hour 30 minutes.
1. With the oven off, press button : the display will show “00:00:00”.
2. Press buttons and to select the desired time.
3. Press button to start the countdown. When the set time has elapsed, the display will show “00:00:00” and an
acoustic signal will sound. At this point the time can be prolonged, proceeding as described above, or the timer can be
deactivated by pressing button (the time of day will be shown on the display).
PREHEAT
No
TEMPERATURE
180°C
HH:MM
END TIME
Forced Air
19:20
- 00:20
PREHEAT
No
TEMPERATURE
180°C
HH:MM
END TIME
Forced Air
19:20
- 00:20
PREHEAT
No
TEMPERATURE
180°C
HH:MM
END TIME
Forced Air
20:10
- 00:20
Residual Heat
168°
19:42
Press to set Timer, to Start
00 : 00 : 00
(HH) (MM) (SS)
Press to set Timer, to Start
01 : 10 : 00
(HH) (MM) (SS)
Timer
01 : 09 : 00
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht BLTM 9100-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht BLTM 9100-01 in the language / languages: English as an attachment in your email.

The manual is 10,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht BLTM 9100-01

Bauknecht BLTM 9100-01 User Manual - German - 21 pages

Bauknecht BLTM 9100-01 User Manual - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info