806777
9
Zoom out
Zoom in
Previous page
1/16
Next page
EN
9
REMOTE CONTROL
If your appliance is properly connected, it’s possible
to press the icon , to activate Remote Control.
Through your mobile device, you will be allowed
to remotely control the oven, to send inputs and
supervise cooking cycles.
When a cooking cycle is sent from the App, the
display shows the information ‘Cycle received’ for
some seconds, then the cycle starts.
CYCLE RECEIVED
RESET CONNECTION
This function could be useful in the event that your
home network properties has changed (network name
or password).
Before resetting the connection, please check if it is
possible to restore the network name and password
that you used when you connected the appliance
to your home network. In this case it would not be
necessary to reset the connection.
To reset the connection, please follow this
path: SETTINGS > CONNECTIVITY MENU > RESET
CONNECTION > YES. The display will ask Are you
sure?”. By pressing , the connection will be reset.
You can now connect again your appliance (see “How
to Setup paragraph).
SOFTWARE UPDATE
While in Standby, an appliance already configured
for connection, with WiFi reception enabled, can
automatically update the software when a new
version is available.
SOFTWARE UPDATE
When the update is in progress, the percentage of
completion will be shown on the display.
Note: Make sure that the appliance power source is always
engaged during this software update process.
During the update process it is impossible to interact with the
control panel.
CONNECTIVITY FAQ
Which WiFi protocols are supported?
The WiFi adapter installed supports WiFi b/g/n for
European countries.
The following router settings are required: 2.4 GHz
enabled, WiFi b/g/n, DHCP and NAT activated.
Are there any differences between using a
smartphone (or tablet) with Android or iOS?
You can use whichever operating system you prefer, it
makes no difference.
Can I use mobile 3G tethering instead of a router?
Yes, but cloud services are designed for permanently
connected devices.
How can I check whether my home internet
connection is working and wireless functionality is
enabled?
You can search for your network on your smart
device. Disable any other data connections before
trying.
How can I check whether the appliance is
connected to my home wireless network?
Access your router configuration (see router manual)
and check whether the appliances MAC address is
listed on wireless connected devices page.
Where can I find the appliances MAC address and
the SAID code?
There is a sticker on your appliance with a QR-code:
Close to the QR-code you should find the SAID code
and the MAC address.
It is also possible to retrieve the SAID code and the
MAC address pressing SETTINGS on the Control
Panel, then entering the Connectivity menu and
selecting the voices “MAC address or “SAID code.
How can I check whether the appliance is properly
connected to the App?
Open the Bauknecht Home Net App on your mobile
device, and check if your appliance is visible.
Is there anything that can prevent the signal
reaching the appliance?
Check that the devices you have connected are not
using up all the available bandwidth. Make sure
that your WiFi-enabled devices do not exceed the
maximum number permitted by the router.
How far should the router be from the appliance?
Normally the WiFi signal is strong enough to cover
a couple of rooms, but this very much depends on
the material the walls are made of. You can check
the signal strength by placing your smart device
(connected to the same home network) next to the
appliance.
How can I find out the name and password for my
wireless network?
See the router documentation. There is usually
a sticker on the router showing the information
you need to reach the device setup page using a
connected device.
What can I do if my router is using the
neighbourhood WiFi channel?
Force the router to use your home WiFi channel.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht BIK7 CHC8TS PT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht BIK7 CHC8TS PT in the language / languages: English as an attachment in your email.

The manual is 16.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht BIK7 CHC8TS PT

Bauknecht BIK7 CHC8TS PT User Manual - German - 16 pages

Bauknecht BIK7 CHC8TS PT User Manual - Dutch - 16 pages

Bauknecht BIK7 CHC8TS PT User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info