806628

Bauknecht BFP 5O41 PLT X Manual

10
Zoom out
Zoom in
Previous page
1/68
Next page
EN
10
OPTIONS AND SETTINGS
With each cycle additional options can be used. A full list of available options working with specic cycles can be found in the Cycle Table on
the previous page. All active options are shown on the display.
To set an option press „OK” button. SET OPTIONS message is shown for a few seconds. Then use „<” or „>” button to navigate through the
option list. Press „OK” to select the option, in the setting menu the LED above „OK” button is lit.
If the option is not available, it will be still visible in its position but with „ ”
TABLET (All-in-one)
This setting allows you to optimise the performance of the cycle
according to the type of detergent used. Enable it if you use combined
detergents in tablet form (rinse aid, salt and detergent in 1 dose).
To set the Tablet, enter in the setting
menu by pressing „OK” button and
navigate with „< , >” until „TABLET”
is shown, then press „OK” button.
START DELAY
The start of the cycle may be delayed for a selected period of time.
To set a delay, enter in the setting menu by pressing „OK” button and na-
vigate with „< , >” until „START DELAY” is shown, then press „OK” button.
With each press of the button “>” or “<“, the delay start increases by:
• every 0:30 if selection below 4 hours,
• every 1:00 if selection is below 12 hours,
• every 2 hours if selection is above 12 hours.
Default value is OFF.
If delay is selected, the is . lit.
Once „OK” button is pressed the
delay is conrmed and the machine
comes back to the cycle selection
screen with delay value visible.
Press „START/PAUSE” button to
start the delay.
To remove the delay, press „<” or „>” button until „OFF” is displayed.
MULTIZONE
If there are not many dishes to be washed it can be loaded in one rack
only. Using this option you can select which rack you want to wash.
Select a compatible cycle (see “Cycles table”), and then press the
MULTIZONE button: the symbol of the chosen rack will appear on
the display.
By default the MULTIZONE is not active and all racks icons are lit.
Selected only lower rack
Selected only upper rack
Selected only cutlery rack
Remember to load the upper or lower rack only, and to reduce
the amount of detergent accordingly.
If upper rack is removed, please apply detergent directly
to the tub instead of detergent dispenser.
POWER CLEAN
Thanks to additional water jets this option provides a more intensive
and powerful wash in the specic area of lower rack.
Default value is OFF.
To set the Power Clean, enter in
the setting menu by pressing „OK
button and navigate with „< , >”
until „POWER CLEAN” is shown,
then press „OK” button.
TURBO
This option can be used to reduce the duration of the main cycles
while maintaining washing and drying performance levels.
To set the Turbo, enter in the setting
menu by pressing „OK” button and
navigate with „< , >” until „TURBO”
is shown, then press „OK” button.
With each press of the button
„>” or „<“ option will be ON or OFF.
Conrm by pressing „OK” button.
KEYLOCK
The KEYLOCK function blocks the
control panel except the „ON/OFF”
button.
To activate the Keylock, enter in the
setting menu by pressing „OK” button
and navigate with „< , >” until
„KEYLOCK” is shown, then press OK.
Once set, to deactivate it keep pressing „OK” button for a few seconds.
TUB LIGHT
When the feature is active the LEDs in the tub are automatically
switched on/o as soon as the user open/close the door respectively.
If the door remains opened for more than 10 min, the LEDs in the
tub switch o (to turn them on again, the door has to be closed and
opened again).
This feature is active by default, but it is possible to deactivate it in the
“SETTINGS MENU”.
TABLET OFF
TABLET ON
TABLET ON
START DELAY OFF
<STARTS IN h> OFF
<STARTS IN h> 4:00
<STARTS IN h> 4:00
POWER CLEAN OFF
POWER CLEAN ON
POWER CLEAN ON
KEYLOCK ACTIVATED
PRESS "OK” FOR 3 SEC.
KEYLOCK DEACTIVATED
KEEP PRESSED…
TURBO OFF
TURBO ON
TURBO ON
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht BFP 5O41 PLT X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht BFP 5O41 PLT X in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 38.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info