Manual Bauknecht BFP 5O41 PLT X (page 4 of 68) (English, German, Dutch, French, Italian)

806628

Zoom out

Zoom in

1/68

FIRST TIME USE

After connecting the appliance to the power supply for the rst time,

the display will guide you to set up the appliance for rst use.

1. The language selection

To select preferred language please

press button „<” or „>”.

Conrm by pressing „OK” button.

After language conrmation, the appliance will go through the rst time

use conguration menu.

2. Setting the water hardness

The water hardness is by default

set to level 3. To change water

hardness level press button „<” or „>”

repeatedly.

To conrm your choice press „OK”

button. The level must be set

according to the table below.

To allow the water softener to work in a perfect way, it is essential that

the water hardness setting is based on the actual water hardness in your

house. This information can be obtained from your local water supplier.

3. Filling the water softener

When water hardness is set, it is

required to ll water softener with

water and special regeneration salt.

Remove the lower rack and unscrew

the reservoir cap (anticlockwise)

As a rst step it is needed to ll

reservoir with water ( ~1.5 litres).

Once done, proceed to the next

step by pressing „OK” button.

Position the funnel (see gure) and ll the salt reservoir right up to its

edge (approximately 1 kg); it is not unusual for some water will spill out.

Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get

into the container during the wash program (this could damage the

water softener beyond repair).

Once done, proceed to the next step by pressing „OK” button.

Only use salt that has been specically designed for dishwashers.

4. Setting the brightness level

The brightness level is by default set

to level 5. To change brightness level

press button „<” or „>” repeatedly.

To conrm Your choice press „OK”

button.

5. Detergent type operation

In this step it is very important to

choose what type of detergent will

be used (tablet/capsule or

gel/powder).

If you prefer to use All-in-one

detergent in tablet or capsule for

washing - press „OK”, then go to

step 7. Open tap operation on the

next page.

The symbol on display will be lit. If you prefer to use gel or

powder detergent for washing, press „<” or „>”, then go to step 6.

Rinse aid operation.

6. Rinse aid operation*

*If All-in-one detergent was chosen in the previous step, this step will

be skipped by the appliance.

LANGUAGE: ENGLISH?

<> = CHANGE OK = YES

ENGLISH

SELECTED

WATER HARDNESS = 3

<> = CHANGE OK = YES

WATER HARDNESS

(1=MIN, 5=MAX)

Water Hardness Table

Level °dH

German degrees

°fH

French degrees

°Clark

English degrees

1 Soft 0 - 6 0 - 10 0 - 7

2 Medium 7 - 11 11 - 20 8 - 14

3 Average 12 - 16 21 - 29 15 - 20

4 Hard 17 - 34 30 - 60 21 - 42

5 Very hard 35 - 50 61 - 90 43 - 62

POUR WATER

OPERATION

INSERT 1,5 LITER OF

OK = DONE

WATER IN THE

OK = DONE

WATER SOFTENER

OK = DONE

INSERT SALT

OPERATION

ADD 1KG OF SALT

OK = DONE

IN THE SALT DISPENSER

OK = DONE

Whenever you need to add salt, it is mandatory to complete the pro-

cedure before the beginning of the washing cycle to avoid corrosion.

Residual saline solution or grains of salt can lead to corrosion,

irreparably damaging the stainless steel components.

The guarantee is not applicable if faults are caused by such

circumstances.

If the salt container is not lled, the water softener and the heating

element may be damaged as a result of limescale accumulation.

Using of Salt is recommended with any type of dishwasher detergent.

ADJUST BRIGHTNESS

(1=MIN, 5=MAX)

BRIGHTNESS = 5

<> = CHANGE OK = YES

DETERGENT TYPE

OPERATION

DO YOU USE

<> = NO OK = YES

DETERGENT?

<> = NO OK = YES

“ALL IN ONE”

<> = NO OK = YES

RINSE AID

OPERATION

INSERT RINSE AID

OK = DONE

IN THE DISPENSER

OK = DONE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht BFP 5O41 PLT X in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 38.22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bauknecht BFP 5O41 PLT X Manual

Product: