Manual Bauknecht BFC 3C26 PF A (page 6 of 8) (English)

659222

Zoom out

Zoom in

1/8

LOADING THE RACKS

CUTLERY RACK

The third rack was designed to

house the cutlery.

Arrange the cutlery as shown in the

figure.

A separate arrangement of the

cutlery makes collection easier after

washing and improves washing and

drying performance.

Knives and other utensils with sharp edges must be positioned

with the blades facing downwards.

The geometry of the rack makes it

possible to place such small items as

coffee cups in the area in the middle.

UPPER RACK

Load delicate and light dishes: glasses, cups, saucers, low salad bowls.

(loading example for the upper rack)

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted: high position to place

bulky crockery in the lower basket and low position to make the most

of the tip-up supports by creating more space upwards and avoid

collision with the items loaded into lower rack.

The upper rack is equipped with a

Upper Rack height adjuster

(see figure), without pressing the

levers, lift it up by simply holding the

rack sides, as soon as the rack is stable

in its upper position.

To restore to the lower position, press

the levers A at the sides of the rack and

move the basket downwards.

We strongly recommend that you

do not adjust the height of the rack

when it is loaded.

NEVER raise or lower the basket on

one side only.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable flaps can be positioned at

three different heights to optimize the

arrangement of crockery inside the rack.

Wine glasses can be placed safely in the

foldable flaps by inserting the stem of each

glass into the corresponding slots.

For optimum drying results incline the

foldable flaps more. To change the inclination,

pull up the foldable flap, slide it slightly and

position it as you wish.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids

should ideally be placed at the sides to avoid interferences with the

spray arm.

The lower rack has tip-up supports which can be used in a vertical

position when arranging plates or in a horizontal position (lower) to

load pans and salad bowls easily.

(loading example for the lower rack)

POWER CLEAN IN LOWER RACK

Power Clean® uses the special water jets in

the rear of cavity to wash more intensively

the high dirty items.

Placing the pots/casseroles faced to the

Power Clean® component please activate

the POWER CLEAN on the panel.

The lower rack has a Space Zone, a special pull-out support in the rear

of the rack that can be used to support frying pans or baking pans in

upright position, thus taking up less space.

In order to use it, just get hold of the coloured grip and pull it upwards

while rotating it forward. The supports can slide right and left to fit the

size of the crockery.

How to use Power Clean®:

1. Adjust the Power Clean® area

folding down the rear plate

holders to load pots.

2. Load pots and casseroles inclined

vertically in Power Clean® area.

Pots have to be inclined towards

the power water jets.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht BFC 3C26 PF A in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht BFC 3C26 PF A

Bauknecht BFC 3C26 PF A User Manual - German - 8 pages

Bauknecht BFC 3C26 PF A User Manual - Dutch - 8 pages

Bauknecht BFC 3C26 PF A User Manual - French - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bauknecht BFC 3C26 PF A Manual

Product: