506977
14
Zoom out
Zoom in
Previous page
1/22
Next page
EN40
When the button is pressed, the oven will propose saving your selection as number 1 of 10 available
stored Favourites. If you wish to save it in a different position, you can change the number by pressing
buttons before confirming your selection with button . If the memory is full or the position
has already been taken, the function will be overwritten.
If, on the other hand, you do not wish to store the settings, simply press the button and move on to
another function by pressing the buttons or else switch the oven off.
To bring up your saved settings at a later date, press the button and select one of the stored functions,
then press the buttons to view the desired function.
Press the button and start cooking by pressing the button .
SETTINGS
1. To change some display settings, select “SETTINGS” from the main menu using buttons .
2. Confirm by pressing : the display shows which settings can be changed (language, volume of
acoustic signal, display brightness, time, energy saving function).
3. Select the setting you wish to change using buttons .
4. Press button to confirm.
5. Follow the instructions of the display to change the settings.
6. Press button ; a message appears on the display confirming your selection.
N.B.: When the oven is switched off, if the ECOMODE (Energy saving) function is selected (ON), the display
switches off after a few seconds, showing the clock. To view information on the display and switch the light
on again, just press any keys or turn one of the knobs. During a cooking function if the ECOMODE is
activated the cavity lamp will be switched off after 1 minute of cooking and reactivated for each user
interaction. If, on the other hand, the function is not selected (OFF), after a few minutes the display is merely
dimmed.
PURECLEAN™ CLEANING CYCLE
To keep the oven in best condition, carry out the PURECLEAN™ cleaning cycle after each use. The cycle
takes 35 minutes, including a cooling stage, and must be carried out as follows:
For the description of this function, see the chapter CLEANING and the functions table on page42.
1. Proceed with oven cold.
2. Wet the cellulose cloth provided under running water and wring it out so that it does not drip.
3. Open the oven door and remove the enamelled accessories.
4. Cover the bottom of the oven completely with the cellulose cloth.
5. Distribute 350 ml of water evenly on the cellulose cloth. A smaller or greater amount of water could
compromise proper functioning of the cycle.
6. Close the oven door.
To start the oven cleaning cycle, proceed as follows:
1. Select PURECLEAN™ from the main menu with the buttons and .
2. Press button , the display shows:
3. Press button : the help message appears, press button to confirm and the cleaning cycle
starts.
IMPORTANT:To prevent steam coming out, do not open the door during the cycle.
4. At the end of the cycle, remove the cellulose cloth and eliminate any residual water in the oven.
5. Then start cleaning using a sponge, moistened with hot water (cleaning could be compromised if
delayed by more than 15 minutes).
35 minutes water cleaning
Pureclean
1/1
Insert the cloth
& press
TIME
Cleaning
02:59
END TIME
15:00
TIME
Cleaning
00:00
END TIME
15:00
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht BCTMS 9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht BCTMS 9100 in the language / languages: English as an attachment in your email.

The manual is 9,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht BCTMS 9100

Bauknecht BCTMS 9100 Manual - English, German - 132 pages

Bauknecht BCTMS 9100 User Manual - German - 26 pages

Bauknecht BCTMS 9100 Manual - Dutch - 132 pages

Bauknecht BCTMS 9100 User Manual - Dutch - 25 pages

Bauknecht BCTMS 9100 User Manual - French - 25 pages

Bauknecht BCTMS 9100 Manual - French - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info