Eco50°- Program is suitable to clean normally soiled tablewa-
re, that for this use, it is the most ecient program in terms of
its combined energy and water consumption, and that it is used
to assess compliance with the EU Ecodesign legislation.3:309.50.75
P2 Auto Intensive 65° - Automatic pro-
gram for heavily soiled dishes and pans. Senses the level of so-
iling on the dishes and
adjusts the program
accordingly. When the
sensor is detecting the
soil level an animation
appears in the display
and the cycle duration
is updated.
2:25-3:1015.5-24.51.30-1.70
P3
Auto Mixed 55° - Automatic program
for normally soiled dishes with dried
food residues. 1:20-3:007.5-19.50.75-1.20
P4
Auto
Fast
50° - Automatic program for
normally and lightly soiled dishes. The
everyday cycle that ensures optimal
cleaning and drying performance in a
shorter time. 1:00-1:507.5-15.50.70-1.10
P5
Rapid 45°
- Program is recommended for limited amount of li-
ghtly-soiled dishes with no dried food residues. Does not include
the drying phase.
-0:30-0:4010-120.55-0.65
P6
Crystals 45° - Program for delicate items, which are more sensiti-
ve to high temperatures, for example, glasses and cups.
1:40-1:5012.5-16.50.95-1.20
P7
Silent 55° - Suitable for night-time operation of the appliance.
Ensures optimal cleaning and drying performance with the
lowest noise emission.3:50-4:1010.5-14.50.80-1.15
P8
Sanitizing 65° - Normally or heavily soiled crockery, with
additional antibacterial wash. Can be used to perform mainte-
nance of the dishwasher.-1:55-2:1012-191.40-1.80
P9 Prewash - Used to refresh crockery planned to be washed
later. No detergent is to be used with this program.-0:124.50.10
P10
Self Clean 65° - Program to be used to perform maintenance
of the dishwasher, to be carried out only when the dishwasher
is EMPTY using specic detergents designed for dishwasher
maintenance.
--1:1511.01.10
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and pressure of the incoming
water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor calibration. The sensor calibration can increase
program duration by up to 20 min.
OPTIONS can be selected/ deselected, after choosing the program, directly by pressing the corresponding button (if available - the indicator lights up)
(see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED ashes rapidly
3 times and beeps will sound. The option will not be enabled. An option can change time or water or energy consumption for the program.
OPTIONS AND FUNCTIONS
HALF LOAD - If there are not many dishes to be washed, HALF LOAD
is used to save water, electricity or time, depending on the selected
program. Remember to reduce the amount of detergent.
EXTRA DRY - The higher temperature during the final rinse and the
extended drying phase which allows for improved drying. The EXTRA
DRY option results in the lengthening of the wash cycle.
DELAY - The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the DELAY button
(repeatedly) to delay the start of the program. Adjustable from 0:30 to 24
hours. Once the 24 hours setting is reached, press the DELAY another time
to deactivate the DELAY function.
2. Press the START/Pause button and close the door within 4 sec. the timer
will begin counting down.
3. Once this time has elapsed, the indicator light switches o and the program
begins automatically.
The DELAY function cannot be set once a program has been started.
POWER CLEAN® - Thanks to the additional power jets this option
provides a more intensive and powerful wash in the lower rack, in the
specific area. This option is recommended for washing pots and casseroles
(please refer to the Power Clean®in loading section).
FAVOURITE PROGRAM The FAVOURITE program may be saved and
will be easily accessible. Find the program using PREVIOUS/NEXT, and
then press the FAVOURITE program button for 3 seconds.
WATER TAP CLOSED – Alarm - Flashes when there is no inlet water or
water tap is closed.
LIGHT ON THE FLOOR - A LED light projected on the oor indicates
that the dishwasher is working. The light goes o at the end of a cycle.
This feature is active by default, but it is possible to deactivate it in the
“SETTINGS MENU”.
ActiveDry - It is a convection drying system which automatically opens
the door during/after the drying phase to ensure exceptional drying
performance every day. The door opens at a temperature that is safe to
your kitchen furniture.
As additional steam protection, specially designed protection foil is added
together with the dishwasher.
To see how to mount protection foil please refer to INSTALLATION GUIDE.
This feature is active by default, but it is possible to deactivate it in the
“SETTINGS MENU”.
DESCALE – Alarm - Limescale accumulation was detected on the
internal components of the appliance. Check if the Water Hardness
Setting is at the correct value and salt is present in the salt container (see
FIRST TIME USE), then use a descaling product (WPro brand is recommended)
with the Self-Clean program. After a successful descaling, the icon will stop
being displayed.
If the actions above are not performed, product performance will deteriorate.
DESCALE warning will start blinking and «dES» alarm will appear on the
display. If still no action is taken, the appliance will only allow a certain
number of cycles to be started (indicated during «dES» alarm display)
and then will be BLOCKED to prevent component damage, with only
the Self-Clean program available. Performing a full descaling will unblock
the product. In the case of extremely high amounts of limescale, descaling
may have to be performed twice to be ecient.
SENSING - When the sensor is detecting the soil level an
animation appears in the display (around 20 min.) and the cycle
duration is updated. SENSING is for the level of soiling on the dishes and it
is present for all cycles (excepting Eco) adjusting the program accordingly.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bauknecht B8I HP42 LC at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bauknecht B8I HP42 LC in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.
The manual is 56.33 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
