623740
4
Zoom out
Zoom in
Previous page
1/72
Next page
4
O W N E R ' S M A N U A L
SEAT
Turn the seat backrest frame to an upward
position. Lock the backrest to the desired
inclination using the locking knob. Tighten the
locking knob. Attach the seat to the seat frame
with four mounting screws and washers. Attach the
backrest to the backrest frame with four mounting
screws and washers.
METER TUBE
Fit the frame sleeve around the meter tube from
below. Connect the cables coming from the frame
tube and the meter tube. Insert the meter tube into
place inside the frame tube and attach it to the
frame tube using mounting screws and washers.
Caution: Do not pinch the cable! Lower the frame
sleeve into place at the bottom of the meter tube.
HANDLEBAR
Place the handlebar tube into the holding fixture
on the handlebar shaft. Caution: The pin must
be inserted into the groove! Push the handlebar
clamp over the handlebar tube and loosely insert
the screw with the washer. The handlebar clamp
should wrap around the tube uniformly. Insert the
hand wheel for adjusting the handlebars together
with the washer and the spacer sleeve into the
upper hole and tighten. Push the cable from the
hand pulse sensors through the opening beneath
the mounting plate and thread it upward out of the
handlebar shaft. Caution: Do not pinch the cable!
CONSOLE
Connect the cables from the console tube to the
corresponding connectors on the console. Insert
the connected cables into the console tube, but
make sure they are not damaged when the console
is attached. Position the console in place at the end
of the console tube and attach the console using
mounting screws.
EXERCISING
If the product is not stable, adjust the stabilizing
screws under the rear support appropriately.
ADJUSTING RESISTANCE
You can increase or decrease the resistance by using
the +/- buttons. Increase resistance using the +
button and decrease resistance using the - button.
The lower display on the meter shows the selected
resistance level (1-8). The profile display also
illustrates the resistance.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavus CR5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavus CR5 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info