623727
4
Zoom out
Zoom in
Previous page
1/66
Next page
4
O W N E R ' S M A N U A L
B A T AV U S C 1
Place the handlebar shaft onto the frame tube on
the base frame and fasten it using the screws and
the washers. CAUTION: Do not pinch the cable!
Push the tube cover together with the housing
foam ring downward onto the housing.
HANDLEBAR
Assemble the handlebars using the handlebar
clamp, the screw, the washers, the spacer sleeve
and the hand wheel for adjusting the handlebars.
Place the handlebar tube into the holding fixture
(E) on the handlebar shaft. CAUTION: The pin
(F) must be inserted into the groove (G)! Push
the handlebar clamp over the handlebar tube
and loosely insert the screw with the washer. The
handlebar clamp should wrap around the tube
uniformly. Insert the hand wheel for adjusting
the handlebars together with the washer and the
spacer sleeve into the upper hole and tighten. Push
the cable from the hand pulse sensors through the
opening (H) beneath the mounting plate (J) and
thread it upward out of the handlebar shaft.
CONSOLE
Insert the batteries on the back side of the console.
Connect the cable connectors coming out of
the handlebar shaft to the console and place the
console from above onto the mounting plate on
the handlebar shaft. CAUTION: Do not pinch the
cable! Fasten the console using the screws. Do not
tighten the screws too much. Push the console cap
upward and latch it in the console bottom section.
Make sure that the latching pins (K) seat properly.
SEAT
Insert the seat support. Screw in the hand wheel
for adjusting the seat and latch the pin of the hand
wheel into a hole in the seat support. Tighten
the hand wheel. Fasten the seat to the triangular
mounting plate (L) of the seat support using the
nuts and the washers.
PEDALS
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavus C1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavus C1 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info