779132
58
Zoom out
Zoom in
Previous page
1/288
Next page
CycleSafety
34
3.5 Notes on torques
WARNING
Material fatigue due to tightening screw joints incorrectly.
Risk of accident and injury!
xDo not use the cycle if you find loose screw joints.
xScrew joints must be properly tightened with a torque wrench.
xScrew joints must be tightened using the correct torques.
xIf two different torques are indicated for two connected com-
ponents which affect the same point of connection, always ob-
serve the lower of the two values.
To correctly tighten the screw joints, the applicable torques must be observed. This re-
quires a torque wrench with an appropriate adjustment range.
xIf you have no experience with using torque wrenches or do not own a suitable torque
wrench, have the screw joints checked by your dealer.
The correct torque for a screw joint is dependent on the material and diameter of the
screw, as well as the material and design of the component.
xIf you tighten screw joints yourself, check whether your cycle is equipped with alumin-
ium or carbon components (see the specifications data sheet provided by the dealer).
xObserve the specific torques for aluminium or carbon components.
xIndividual components on the cycle are labelled with torque specifications or insertion
depth markings. It is essential that you follow these specifications and markings. If
two different torques are indicated for two connected components, always observe
the lower of the two values. Also read the operating instructions for the components,
if applicable.
Not all components are listed in the following table. The torque specifications are basic
values and do not apply to carbon components.
You can find torque specifications that are tuned to the additional components can be
found on the components. Also read the instructions delivered with the components, if
applicable. Ask your dealer about any missing torque specifications.
The following torque specifications can usually be found as specifications on the compo-
nents or in the accompanying component instructions.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavus 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavus 2020 in the language / languages: English as an attachment in your email.

The manual is 28.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Batavus 2020

Batavus 2020 User Manual - German - 287 pages

Batavus 2020 User Manual - Dutch - 286 pages

Batavus 2020 User Manual - French - 294 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info