779132
40
Zoom out
Zoom in
Previous page
1/288
Next page
CycleBefore setting off
16
1. With brakes that have quick-release
levers, check both brakes to see whether
these levers are open (see “Illustr.:
Quick-release lever position”).
2. Test the functionality of the brakes.
xOperate the brake levers, and coaster
brake if applicable, and listen for
unusual noises.
xCheck that the cycle is difficult or
impossible to push with the brake
applied.
xCheck whether there is any brake pad grinding when the brake levers are re-
leased.
xWhen operating the brake levers, check whether they touch the handlebars. If
necessary, have your dealer readjust the brakes or replace worn components.
3. Test the functionality of the gear shifting system.
xCheck that all the gears shift correctly and whether any unusual noises are pro-
duced in the process.
4. Compress and extend the suspension fork.
xIf you hear unusual noises or the suspension fork gives way without any resist-
ance, have it checked by your dealer.
5. Check whether the quick-release axles or thru-axles, if applicable, are correctly fas-
tened and adjusted (see the “Wheels and tyres / Fitting and removing the front/rear
wheel” chapter).
6. Check whether the handlebars are aligned perpendicularly to the front wheel.
xAdjust the handlebars if they are not perpendicular to the front wheel (see the
“Basic adjustments / Handlebars and handlebar stems / Aligning the handlebars”
chapter).
7. Test the functionality of the bell and lighting.
xCheck whether you hear a clear sound when you operate the bell.
xSwitch on the lighting and check whether the headlamp and rear lamp are lit (see
the “Basic adjustments / Lighting” chapter). With dynamo-equipped cycles, turn
the front wheel to do this.
xRemove any impurities/dirt from the headlamp, reflectors and tail light.
Illustr.: Quick-release lever position (example)
1 Quick-release lever
1
1
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavus 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavus 2020 in the language / languages: English as an attachment in your email.

The manual is 28.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Batavus 2020

Batavus 2020 User Manual - German - 287 pages

Batavus 2020 User Manual - Dutch - 286 pages

Batavus 2020 User Manual - French - 294 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info