Manual Batavia Racer BT-CS006 (page 21 of 60) (English, German, Dutch, French)

589450

Zoom out

Zoom in

1/60

f) Before sawing, rmly tighten the

adjustments of the cutting depth and

cutting angle. If the settings adjust

themselves during sawing, the saw blade may

become clamped and a kickback will occur.

g) Be especially careful, if you are making a

plunge cut in an existing wall or other non-

visible area. The immersed saw blade can

jam when sawing into hidden objects and

cause a kickback.

2.4 SAFETY INSTRUCTIONS FOR THIS MINI

CIRCULAR SAW

a) Check before each use that the safety

guard closes correctly. Do not use the saw

if the lower safety guard does not move

freely and does not close immediately.

Never clamp or secure the lower safety

guard in the open position.

If the saw should accidentally fall to the

ground, the lower safety guard may become

bent. Open the safety guard with the retraction

lever and ensure that it moves freely. Check

that it does not interfere with the saw blade or

other components, at any cutting angle or

cutting depth.

b) Check the condition and operation of the

spring for the lower safety guard. Do not

use the equipment if the lower safety guard

and spring do not work perfectly. Damaged

parts, adhesive deposits or accumulations of

shavings retard the operation of the lower

safety guard.

c) When making a plunge cut which is not at

right angles, make sure that the saw's

guide plate can not move laterally. Lateral

movements can cause the saw blade to jam

and hence result in kickback.

d) Do not put down the saw on the workbench

or oor, without the lower safety guard

covering the saw blade.

When slowing down after use, an unprotected

saw blade will move the saw in the direction

opposite to the cutting direction and will saw

whatever lies in its path. Pay attention,

therefore, to the deceleration time of the saw.

2.5 SAFETY INSTRUCTIONS FOR CUT OFF

GRINDING APPLICATIONS

Safety instructions for cut off grinders

The safety guard for the electric power tool

must be securely attached and adjusted so

that maximum safety is attained, i.e. the

smallest possible portion of the grinding

wheel shows openly to the operator. Make

sure that you and any other nearby

individuals are not in the plane of the rotating

grinding disc. The safety guard is intended to

protect the operator from fragments and from

accidental contact with the grinding wheel.

b) Use only diamond cutting discs for your

electric power tool. The fact that you can

attach an accessory to your electric power tool,

does not guarantee that it is safe to use.

c) The permissible rotary speed of the tool

insert must be at least as high as the

quoted maximum rotary speed of the

electric power tool. Accessories which are

rotated faster than their permissible speed may

breakoryoff.

d) Grinding wheels may only be used for their

recommended types of application, e.g.

never grind with the side face of a cutting

wheel. Cutting wheels only remove material

using the edge of the disc. Application of lateral

forces to these grinding wheels can cause

them to break.

e) Always use an undamaged clamping ange

of the correct size and shape for your

selected grinding disc. Suitableanges

support the grinding disc and so reduce the

danger of it breaking.

f) Do not use worn out grinding discs from

larger electric power tools. Grinding discs

from larger electric power tools are not suitable

for the higher rotary speeds of small electric

power tools and can break during use.

g) The outer diameter and thickness of tool

inserts must correspond with the given

characteristics of your electric power tool.

Wrongly-sized tool inserts cannot be

sufcientlyshieldedorcontrolled.

h) Grinding discs and anges must t exactly

on the grinding spindle of your electric

power tool. Toolinserts,whichdonott

exactly to the grinding spindle of the electric

power tool, will rotate unevenly and vibrate

strongly and may lead to loss of control.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia Racer BT-CS006 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia Racer BT-CS006 Manual

Product: