Manual Batavia CROC SAW BT-JCS001 (page 22 of 64) (English, German, Dutch, French)

589480

Zoom out

Zoom in

1/64

contacting anything.

• Pre-plan a safe exit from falling branches

and debris. Ensure the exit route is clear of

obstacles that would prevent or hinder

movement. Remember wet grass and

freshly cut bark is slippery.

• Be aware of the direction that a branch may

fall. Consider all conditions that may affect

the direction of fall, including:

- The intended direction of fall.

- The natural lean of the branch.

- Any unusual heavy limb structure or decay.

- Surrounding trees and obstacles including

overhead lines.

- The wind speed and direction.

• The safe distance between a branch and

debris to be felled and bystanders,

buildings and other objects is at least 2 1/2

times the length of the branch. Any

bystander, building or object within this

distance is at risk from being struck by the

falling branch.

• When cutting a limb that is under tension,

be aware of spring-back. When the tension

in the wood fibres are released the spring

loaded limb may strike the operator and/or

throw the tool out of control.

• Always wear suitable safety equipment

such as nonskid safety shoes, hard hat,

goggles, ear protection and gloves when

operating the tool.

• Ensure someone is nearby (at a safe

distance) in case of an accident.

• Do not attempt to operate the tool when in

a tree, on a ladder or standing on any other

unstable support.

• Keep proper footing and balance at all

times.

• Hold the tool firmly with both hands when

the motor is running.

• Keep handles dry, clean and free from oil

and grease. Greasy oily handles are

slippery causing loss of control.

• Do not let the moving chain contact any

object at the tip of the chain guide bar.

• Keep your saw chain properly tensioned.

Check tension at regular intervals with the

motor stopped and cord disconnected.

• Begin and continue cutting only with the

chain moving at full speed.

• Watch for shifting branches or other forces

that could close a cut and pinch or fall into

the chain.

• Use extreme caution when re-entering a

previous cut. Engage spikes on lower jaw

into wood and allow the chain to reach full

speed before proceeding with cut.

• Use of this tool for operation different to

those intended could result in hazardous

situations. Cut wood only. Don't use this

tool for purposes not intended – for

example - Don't use tool for cutting plastic,

masonry or non-wood building materials.

• If any debris gets caught with the guard or

tool discontinue use, disconnect the power

cord and clear debris.

• Worn chains and chain guide bars should

be replaced.

• Only use replacement bars and chains

specified by the manufacturer.

SAFETY OF OTHERS

• This tool is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they

have been given supervision or instruction

concerning the use of the appliance by a

person responsible for their safety.

• Children should be supervised to ensure

that they do not play with the appliance.

VIBRATION

The declared vibration emission values stated

in the technical data and the declaration of

conformity have been measured in

accordance with a standard test method

provided by EN 60745 and may be used for

comparing one tool with another. The declared

vibration emission value may also be used in a

Croc Saw Manual.indb 22 24-04-14 11:18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia CROC SAW BT-JCS001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia CROC SAW BT-JCS001 Manual

Product: