Manual Batavia BT-PS002 - 7061494 (page 31 of 64) (English, German, Dutch, French)

759585

Zoom out

Zoom in

1/64

1. When installing the miter limit stop on the

guide rail rst set the desired angle and

slide the miter limit stop into the groove of

the guide rail.

2. Tighten the front clamping screw to x the

angle setting.

3. Place the miter limit stop at the straight side

of the work piece.

4. Tighten the second clamping screw to x

the miter limit stop tightly on the guide rail.

5. Slide the miter limit stop into the groove of

the guide rail and set the angle by means of

the notches from 0° to 45° when installing

the miter limit stop on the guide rail.

Note: The pre-punched notches match the

curved angle scale.

6. Tighten the second clamping screw to x

the miter limit stop tightly on the guide rail.

PARALLEL LIMIT STOP AND/OR TABLE

EXPANSION (OPTIONAL)

For cut-off widths up to 180 mm a parallel limit

stop can be used. The parallel limit stop can

also be used as table expansion.

1. Slide the parallel limit stop into the

respective guides at the front and rear of

the base plate.

2. Measure the desired distance and x the

parallel limit stop with the clamping screws

(7).

SAW BLADES

Compatible saw blades are necessary for the

plunge saw to cut different materials fast and

clean.

Saw blades with few teeth (approx. 12 – 18

teeth) are suitable for longitudinal cuts.

For cross cuts saw blades with at least 32

teeth are suitable; better are saw blades with

48 teeth.

For cutting other materials such as aluminium

special saw blades are necessary.

CLEANING AND MAINTENANCE

Disconnect from mains power before carrying

out any maintenance work on the plunge saw!

All maintenance and repair work involving

opening the motor casing must be carried out

by an authorized service center.

Always keep the plunge saw clean. Clean the

plunge saw after every use with a dry cloth or

compressed air. Do not use any aggressive

chemicals for cleaning.

CHANGE CARBON BRUSHES

The saw is equipped with self-isolating special

brushes. They are automatically isolated when

worn, and the tool stops. Check the carbon

brushes regularly. Replace the carbon brushes

with genuine spare parts if they are worn to

the wear limit (approx. 50% of the block).

Always replace the carbon brushes in pairs.

7061494-T-Raxx_1200W-Ma-1805-17.indd 31 17-05-18 10:30

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-PS002 - 7061494 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-PS002 - 7061494 Manual

Product: