Manual Batavia BT-NXF001 7063576 (page 8 of 26) (English, German, Dutch, French)

759816

Zoom out

Zoom in

1/26

English

• (Drinking) water network. Always in com-

bination with a system separator. The

use of a regulator stop is recommended.

NOTE: Use a standard water hose with

suitable coupling (s) for this.

WARNING: Never use the machine without

a system separator on the drinking water

network. Ensure that the connection of your

water installation to which the device is

-

arator according to EN 12729 type BA.

WARNING: 

system separator is considered

non-drinkable.

8.2 Switch on / off

To switch the pressure cleaner on, hold

down the safety switch (1) and press the

main on / off switch lever (2) (see Fig. B).

8.3 Pressure setting

The machine has two pressure settings.

The high pressure setting is suitable for

thorough cleaning removal and the low

pressure setting is suitable for light cleaning

and watering (See Fig. I). The machine is

standard in high pressure mode. Press pres-

sure setting switch (eco) (3) to activate the

low pressure mode.

NOTE: Before use, remove the air in the

hose, hold the machine at your waist (max.



the machine. It can take around 30 seconds

for the water to reach the machine.

8.4 Select a spray mode

Choose a spray mode depending on your



are suitable for cleaning and the spray posi-

tion with the spray symbol is best suited for

watering (See Fig. G).

WARNING: Do not change the spray setting

when the appliance is switched on.

8.5 Use of the foam sprayer

Always use the foam sprayer (9) in combi-

nation with the extension lance (7).

NOTE: When using on a (drinking) water

network, it must be ensured that the water

supply is blocked (by means of a regulator

stop, for example) when the pressure

cleaner is not being used. This prevents the

reservoir from draining.

— Attach the extension lance (7) to the

machine (See Fig. E).

NOTE: To attach, align the two tabs on the

lance with the cutouts as shown (See Fig.E)

— Attach the foam sprayer (9) to the exten-

sion lance (7) (See Fig. K).

NOTE: For mounting, align the two tabs on

the foam nozzle with the recesses in the

extension lance as shown (See Fig. K).

— Remove the soap bottle(18) from the

foam sprayer. This is attached by means



— Fill the soap bottle with the appropriate

cleaning agent.

— Reattach the soap bottle to the foam

sprayer

— After use, remove the remaining cleaning

agent from the soap bottle.

9. Cleaning and maintenance

Remove the battery pack from the tool

before carrying out any adjustment, servic-

ing or maintenance.

Inspect the product for damaged or worn

parts before each use. Do not operate it if



your supplier or the manufacturer for

replacement parts.

9.1 NOTE: For proper maintenance after

using with sea water, the product

should be rinsed by fresh water.

9.2 Hose lter maintenance

Fig.J).

Clean the molded plastic housing of the

machine using a soft brush and clean cloth.

Do not use water, solvents or polishes. Store

in a secure and dry place out of the reach of

children. Do not place other objects on the

product.

10. Cleaning/storage

Before storage, completely drain all the

water from the machine and hose.

Store the machine and the accessories in a

frost free place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-NXF001 7063576 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-NXF001 7063576 Manual

Product: