757197
11
Zoom out
Zoom in
Previous page
1/42
Next page
9
English
desired length. Afterwards re-tighten the
locking nut hand-tight.
13. Operating
13.1 Connect the plug of the hedge trimmer
with the extension cord and the exten-
sion cord with a wall socket.
Use only extension cables which are
approved for outdoor operation.
13.2 Remove the blade bar protection (7) by
pressing on the markings on the blade
bar. Pull out the blade bar protection.
13.3 Form a loop with the
extension cord and
pass it through the
opening in the han-
dle. Hook the exten-
sion cord on the
cable run.
13.4 To unlock the ON/

button. To start the hedge trimmer,
press the ON/OFF switch (2) and the
auxiliary safety switch (5).
When working with the hedge trimmer

both hands, one hand on the handle (1)
and the other hand on the auxiliary
handle (6 or 15).
13.5 For switching off the hedge trimmer,
release the ON/OFF switch.
13.6 Before adjusting the angle of inclination
or the horizontal position of the motor

from power mains.
14. Shoulder strap (accessory)
14.1 Mount the holder for the shoulder strap
as shown on the picture.
14.2 Tighten the holder only hand-tight.
14.3 According to the desired working posi-
tion, you can mount the holder close to
the handle (Position 1) or near the lock-
ing nut (Position 2).


Before cutting bushes, scrubs or
hedges, remove thick branches or simi-
lar material. Make sure that there are no
small animals hidden in the bushes or
hedges.
There are different cutting techniques
and certain seasons to be observed
when trimming hedges or bushes. For
detailed information see appropriate
technical literature.
Please note the local rest periods when
working with the hedge trimmer in
order to avoid disturbances.
If a hedge has to be cut back very sub-
stantially, trim the hedge in two passes.
First cut the hedge to
the desired height and
stretch a string along
the hedge at the
desired height. Guide
the blades of the
hedge trimmer at an
angle of 10 – 15° to the
hedge in order to get a
straight cut.
Trim the hedge to a
trapezoidal shape
cutting from the bottom to the top.
7062983-Hedgetrimmer-Ma-1712-05.indb 9 08-02-18 16:48
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-HT002 - 7062983 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-HT002 - 7062983 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info