759824
13
Zoom out
Zoom in
Previous page
1/48
Next page
14 Cleaning
NOTE! Make sure that the device has com-
pletely cooled down before cleaning and
remove the plug from the socket.
Regularly clean the machine housing with a soft
cloth, preferably after each use. Keep the venti-
lation slots free from dust and dirt. If the dirt
does not come off use a soft cloth moistened
with soapy water. Never use solvents such as
petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
15 Maintenance and Repair
Firstly let the unit run in position I for at least one
minute to lower the temperature to 50 degrees
Celsius.
Disconnect the mains plug from the socket and
allow the appliance to cool down completely!
If possible, clean the appliance after each use.
Use a damp cloth, on stubborn dirt use a brush.
Do not use cleaning agents such as benzine,
alcohol, ammonia, etc. These substances
attack the plastic parts.
15.1 What could be the problem if the
device does not work:
Plug is not plugged into socket: Plug into
socket
Heating element overheated:
Allow the appliance to cool down
Weed is not destroyed: Wrong nozzle is used
Not close enough to the weed: Wrong
temperature setting
Fuel does not ignite: Incorrect nozzle is used
Incorrect temperature setting
Nozzle not covered with fuel
In the case of faults not listed here, please con-
tact the manufacturer or our customer service
(address see warranty card).
16 Transport
The device can be adjusted for each application
so that you can work with it optimally.
Heat gun
Weed killer
BBQ / Firelighter (with or without extension)
Carry the device only by the provided handles.
When transporting, make sure that the device
does not get damp and that it is protected
against impacts.
17 Storage
Make sure the unit has fully cooled down before
storing.
Clean the device after use.
Store the device in a dry environment.
Store the device in a dust-free environment.
Keep the appliance away from children.
Keep the appliance in a dry place with a
temperature between 5°C and 30°C.
Keep the original packaging of the heat
gun.
18 Disposal
Do not dispose of electric power tools
with domestic refuse. The electric power
tool is shipped in packaging to reduce
transport damage. This packaging is a raw
material and as such can either be reused or
can be fed back into the raw material cycle. The
electric power tool and its accessories are
made from various materials such as metals
and plastics. Take defective components to a
special refuse collection point. Ask about these
at your specialist shop or local council.
13
.
7063006-Maxxheat-Basic-MA-1712-21.indb 13 04-01-18 11:05
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-HG004 7063388 UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-HG004 7063388 UK in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info