759824
10
Zoom out
Zoom in
Previous page
1/48
Next page
Always check that the power supply
corresponds to the voltage on the
rating plate.
Class II machine – Double insulation
– You don’t need any earthed plug.
4.5 Using extension cables
Only extension cables of type H05RN-F may be
used. Only use an approved extension cable
suitable for the power input of the machine. The
minimum conductor size is 1.0 mm2. When
using a cable reel always unwind the reel com-
pletely Inadequate extension cords can be
dangerous.
If an extension cord is used, it shall be suitable
for outdoor use, and the connection has to be
kept dry and off the ground. It is recommended
that this is accomplished by means of a cord
reel which keeps the socket at least 60 mm
above the ground.
4.6 Connecting to power supply
This product is designed with a cord retainer
that prevents the extension cord from being
pulled loose while using.
NOTE: Always use cord retainer to properly
attach extension cord to the machine. Failure to
use cord retainer may result in damage to the
machine and/or extension cord.
Form a loop with the end of the extension
cord.
Insert loop portion of extension cord
through opening and place over cord
retainer.
Slowly pull loop against cord retainer until
the slack is removed.
Plug product into extension cord.
NOTE: Failure to remove all excess cord slack
from extension cord retainer could result in plug
loosening from receptacle.
5 Technical Data
Voltage: . . . . . . . . . . 230 – 240 V~ 50 Hz
Power: . . . . . . . . . . . . . . . . 2000 W
Air ow: . . . . . . . . . . . . . . . 500 l/min
Setting I (venting / cooling): . . . . . . . .50°C
Setting II: . . . . . . . . . . . . . . . . 600°C
6 Unpacking
WARNING: Some packaging materials may be
hazardous to small children. Danger of suffoca-
tion! Dispose of these materials responsibly!
Keep all the parts that are supplied with it in a
safe place.
Check that all parts are included and check for
possible faults.
Please contact the supplier or manufacturer if
parts are missing or are not in order.
7 Contents
1 Weed Killer
1 Nozzle for surface weed control (Fig. B, 9)
1 Heating pin for underground weed control
(Fig. B, 11)
1 Nozzle for BBQ / replace (Fig. B, 10)
1 Extension handle (2 parts) (Fig. A, 4)
1 Instruction manual
8 Operation
8.1 Before use
Always use with caution! Do not
cover the ventilation openings during
use as it causes a risk of burns!
Do not touch the hot nozzle!
8.2 Temperature settings:
With the temperature switch (6) you can select
from two temperature settings. Depending on
the application, you can use the following
settings:
Setting I 50°C (venting / cooling)
Setting II 600°C
The volume of air in each setting 500L /Minute.
8.3 To turn on the power:
Push the switch (6) in position I or position
II.
8.4 To turn off the appliance:
Push the switch on position “0”.
10
.
7063006-Maxxheat-Basic-MA-1712-21.indb 10 04-01-18 11:05
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-HG004 7063388 UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-HG004 7063388 UK in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info