Manual Batavia BT-HG004 - 7063006 (page 8 of 48) (English, German, Dutch, French)

758294

Zoom out

Zoom in

1/48

of drugs, alcohol or medication. A

moment of inattention while operating

power tools may result in serious personal

injury.

b. Use safety equipment. Always wear eye

protection. Safety equipment such as dust

mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate

conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the

switch is in the off position before plug-

ging in. Carrying power tools with your

nger on the switch or plugging in power

tools that have the switch on invites

accidents.

d. Remove any adjusting key or wrench

before turning the power tool on. A

wrench or a key left attached to a rotating

part of the power tool may result in per-

sonal injury.

e. Do not overreach. Keep proper footing

and balance at all times. This enables

better control of the power tool in unex-

pected situations.

f. Dress properly. Do not wear loose cloth-

ing or jewellery. Keep your hair, clothing

and gloves away from moving parts.

Loose clothes, jewellery or long hair can be

caught in moving parts.

g. If devices are provided for the connec-

tion of dust extraction and collection

facilities, ensure these are connected

and properly used. The use of these

pieces of equipment reduce hazards

caused by dust.

3.4 Power tool use and care

a. Do not force the power tool. Use the

correct power tool for your application.

The correct power tool will do the job better

and safer at the rate for which it was

designed.

b. Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the

switch is dangerous and must be repaired.

c. Disconnect the plug from the power

source before making any adjustments,

changing accessories, or storing power

tools. Such preventive safety measures

reduce the risk of starting the power tool

accidentally.

d. Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e. Maintain power tools. Check for mis-

alignment or binding of moving parts,

breakage of parts and any other condi-

tion that may affect the power tools

operation. If damaged, have the power

tool repaired before use. Many accidents

are caused by poorly maintained power

tools.

f. Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind

and are easier to control.

g. Use the power tool, accessories and

tool bits etc., in accordance with these

instructions and in the manner intended

for the particular type of power tool,

taking into account the working condi-

tions and the work to be performed. Use

of the power tool for operations different

from intended could result in a hazardous

situation.

3.5 Service

a. Please use a qualied expert who uses

original replacement parts to repair your

power tool. This will ensure proper func-

tioning of the power tool.

4 Additional safety instructions

When using electric tools, basic safety

precautions should always be followed

to reduce the risk of re, electric shock

and personal injury.

Read all these instructions before

attempting to operate this product and

save these instructions.

4.1 Before using the appliance

• Check the following:

– Make sure the voltage of the hot air gun

corresponds with the power voltage;

– Are the mains lead and the mains plug in a

good state: strong, without ravels or

7063006-Maxxheat-Basic-MA-1712-21.indb 8 04-01-18 11:05

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-HG004 - 7063006 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-HG004 - 7063006 Manual

Product: