Manual Batavia BT-DS003 - 7063414 (page 9 of 30) (English, German, Dutch, French)

758295

Zoom out

Zoom in

1/30

English

• Depending on grain size there are

degrees of coarseness. The coarseness

is specied by a number on the back of

the papers. The higher the number is,

the ner the grain.

• It is important to use the right paper for

each job. For rough sanding use grain

sizes up to 80, for soft wood as larch,

pine or spruce use papers from 120 to

150. For dense hardwood as beech or

maple, the grain sizes up to 220 can be

used.

9. Attaching the sanding paper

Choose the sanding paper according to the

material being worked.

9.1 Attach the sanding paper to the sanding

plate (3) and make sure the holes on the

sanding paper t with the openings on

the base plate. Only this way the sand-

ing dust can be extracted through the

built-in dust removal in the sanding

plate.

9.2 Firmly press the sanding paper down on

the sanding plate.

10. Assembling/Disassembling/

Emptying the dust collection box

Always use the dust collection box (6) when

sanding.

10.1 Place the dust collection box onto the

provided dust collection flange (5).

Push the connection piece into the

flange and turn it clockwise until it locks

into place.

10.2 To remove the dust collection box, turn

the connection piece counter clockwise

and pull it out of the flange. Preferably

clean the dust collection box and the

exhaust connection in the housing after

each use. By doing this the dust collec-

tion box can be easily inserted and

removed.

10.3 For emptying the dust collection box,

just tap out or, if available, clean with

compressed air.

11. ON/OFF switch

11.1 After attaching the sanding paper con-

nect the multi sander to the dust extrac-

tion and to the mains power.

11.2 To turn the machine on, set the ON/OFF

switch (1) to I. To turn the machine off,

set the ON/OFF switch to O.

12. Sanding

• Apply only moderate pressure on the

machine. Too much pressure will lead

to jamming of the mechanism and will

spoil the result. Excessive pressure will

overheat the machine.

• Always select abrasive paper with

coarseness suited the condition of the

surface.

• Use ner papers in the consecutive

sanding until the desired smoothness is

reached. If you desire a very smooth

nish you may slightly moisten the

surface before the last sanding. This

will slightly swell the bres and allow a

smoother nish.

13. Cleaning and maintenance

• To avoid injury always pull the power

plug before maintaining or cleaning the

machine.

• Clean the machine with a moist cloth.

• If the machine is very dirty use a mild

detergent or soap on the cloth. Other

cleaning agents may contain chemical

substances which may damage the

plastic parts of the machine.

• Do not allow liquids to enter the

machine and do not immerse the

machine in liquids of any kind.

• Repairs, inspections of the interior of

the machine, adjustments and replace-

ment of the carbon brushes may only

be undertaken by a professional. Only

identical replacement parts may be

used! For further information please

contact our customer service

department.

• Always keep the ventilation slots (4)

open and clean. After each use remove

dirt and contaminations with a brush or

blow it out with compressed air.

7062852-Delta_Sander_130W-Ma-1805-01.indb 7 01-05-18 12:33

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-DS003 - 7063414 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-DS003 - 7063414 Manual

Product: