Manual Batavia BT-CSD002 DUO (page 15 of 36) (English, German, Dutch, French)

589478

Zoom out

Zoom in

1/36

charged after only 60 seconds. This way it is

ready for use all the time.

Regardless of the charging condition, the

ash cell screwdriver can be charged at any

time without damaging the cells.

Charge the screwdriver before rst use.

Note:

The charger BT-FCC001 can only be used for

the driver BT-CSD002.

1. Connect the power cord (5) of the charger

(6) with a wall socket. The rst LED of the

charging LEDs (3) lights up.

2. Put the lower end of the handle of the

screwdriver, as pictured on the overview

photo, as far as it will go into the charger, by

inserting the charging terminals into the

corresponding openings of the charger.

3. Depending on the charging state, the

corresponding charging LEDs light up and

ash. The ash cell is fully charged when all

LEDs shine permanently. The screwdriver is

ready for use.

Note:

When inserting the screwdriver into the

charger, make sure it easily can be placed. Do

not use force.

INSERTING/REPLACING THE SCREW BIT

• Before changing the screw bit, set the

rotating direction button (7) into the middle

position to avoid unintentional start-up.

• Only replace the screw bit when the

screwdriver is switched off.

• Pull out the screw bit from the bit holder (1)

and replace it with the desired one. A

magnet inside the bit holder holds the

screw bit in its place.

USING THE TWIST-GRIP

The ash cell screwdriver is equipped with an

adjustable twist-grip which can be setup as a

straight grip or as a pistol grip. Press the

unlocking button (8) at the top of the screw-

driver and twist the grip to the desired position.

Straight Grip Pistol Grip

SWITCHING ON AND OFF/SCREWING

1. Press the ON/OFF trigger (2) to switch

on the ash cell screwdriver. Release the

trigger to switch off the screwdriver.

2. Use the rotating direction button (7) to

reverse the rotating direction. In the

middle position the ON/OFF trigger is

locked. Set the switch to this position

when putting down the machine to avoid

an accidental start-up.

3. Before using the machine, check whether

the screw bit is inserted correctly. Avoid

overtightening as this may damage the

screw head or the threads. Press the

screw bit against the screw with a

constant pressure and drive in the screw.

7061166 Ma # 1201-09.indd 15 09-01-12 12:29

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CSD002 DUO in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CSD002 DUO Manual

Product: