758252
6
Zoom out
Zoom in
Previous page
1/86
Next page
English
4
1. Pack contents/parts list
1. Front handle
2. On/Off switch for the laser
3. Access switch for the protective hood
4. On/Off switch for the mini circular saw
5. Rear handle
6. Mains cord with plug
7. Vents
8. Cover for carbon brush (× 2)
9. Cutting depth limiter
10. 
11. Spindle
12. 
13. Clamp bolt
14. Base plate
a. Cutting line guide (× 2)
15. Parallel guide
a. Locking knob
b. Scale
16. Protective hood
17. Dust extractor connection
18. Spindle lock
19. Cutting depth scale
20. Laser
21. Battery compartment
a. Battery compartment lid*
b. Screw*
c. Button cell
22. Suction hose
23. Star hex key
24. Transport case
25. Diamond cutting disc
26. Multi Material (MM) saw blade, 24 teeth
The product contents include one CR2032
battery.
Parts labelled with * are not represented in
the overview. For this, refer to diagram 9
and the relevant section within the user
manual.
2. General information
2.1. Reading and storing the user
manual
This user manual accompanies this
710 W Mini Circular Saw (referred to
below simply as “product”). It con-
tains important information about safety,
usage and care.
Before using the product, read the user
manual carefully. Pay particular attention to
the safety instructions and warnings. Failure
to comply with the instructions in this user
-
age to the product.
Comply with applicable local or national
regulations concerning the use of this prod-
uct. Keep this user manual in a safe place
for future reference. This user manual
belongs with this product. Make sure to
include this user manual when passing the
product on to third parties.
2.2. Explanation of the symbols
The following symbols are used in the user
manual or on the product:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non-observance of the
instructions in this manual.
Risk of electric shock.
Only operate the spindle lock in idle
mode.
Do not reach into the saw blade.
Caution: laser beam! Do not look
into the laser beam.
Laser information
plate.
The product is not suitable for wet
grinding.
The product is not suitable for
rough grinding.
Switch the product off, pull the
mains plug to disconnect it from
the mains supply and let the
product cool off before setup,
changing accessories, cleaning,
maintenance, storing and
transporting the product.
LASERSTRAHLUNG
NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
LASERSTRALING
KIJK NIET IN DE STRAAL
LASER KLASSE 2
7063051-Thor-Compact-Ma-1804-30.indb 4 04-06-18 11:55
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-CS016 - 7063051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CS016 - 7063051 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info