Manual Batavia BT-CS009 - 7063376 (page 26 of 66) (English, German, Dutch, French)

759584

Zoom out

Zoom in

1/66

English

Before use

Tool inserts must be given a visual inspection

before each start-up. Do not use damaged tool

inserts. Secure the piece to be worked on.

Inserting and changing

Tighten the tool inserts in accordance with

their instructions and those of the electric

power tool’s manufacturer. The tightening of

tool inserts should only be undertaken by

qualied persons. After each tightening, carry

out a test run for a suitable length of time,

during which the characteristic maximum

working speed of the tool insert may not be

exceeded. Always tighten tool inserts without

introducing any out-of-roundness.

Use

• Pay attention to the operating instructions

of the electric power tool with which you

are using the tool insert.

• Before start-up, attach an appropriate

safety device to the electric power tool. Do

not carry out any work without protection

provided through safety devices.

• Use personal protective clothing and

equipment suitable for the type of machine

used and the application undertaken, e.g.

eye and face protection, hearing

protection, respirators, safety shoes,

safety gloves and other protective clothing.

• Only undertake work for which the tool

insert is suitable (taking into consideration

use restrictions, safety instructions and

other data).

• Switch off the electric power tool before

placing it on the workbench or on the oor

and wait until the tool insert is stationary.

• For cut off grinding, place the tool insert

directly in the gap, so that the electric

power tool does not tilt.

• Do not go backwards and forwards in the

material, rather pull the tool calmly through

it.

• Work only at right angles and in straight

lines, to avoid the danger of cracking in

the core or segments breaking off.

• Do not exert a strong grinding pressure;

the weight of the electric power tool will

sufce.

• Do not include any cooling breaks.

• Caution! The tool insert will become very

hot during the work; only touch it with

safety gloves, after it has cooled down.

SAFETY INSTRUCTIONS FOR HANDLING

SAW BLADES

• Only use tool inserts if you are familiar with

their handling.

• Do not exceed the maximum rotation

speed. The maximum permissible rotation

speed indicated on the tool insert must

not be exceeded. Remain within the

rotation speed range, if indicated.

• Do not use cracked tool inserts. Throw

away any cracked tool inserts. Repair is

not permitted.

• Clean off any contamination, fat, oil or

water from the clamping surfaces.

• Do not use any loose spacers or bushes

to reduce the size of the holes in the

circular saw blades.

• Make sure that xed spacers for securing

the tool inserts have the same diameter

and at least 1/3 of the cutting wheel

diameter.

• Make sure that any xed spacer rings are

parallel to one another.

• Handle the tool inserts with care.

Preferably, store these in their original

packaging or in special containers. Wear

safety gloves to improve safe gripping and

to further reduce the risk of injury.

• Before using the tool inserts, make sure

that all the safety devices are suitably

fastened.

• Make sure before use, that the tool insert

you are going to use corresponds to the

technical requirements of this electric

power tool and is suitably fastened.

ADDITIONAL SAFETY ADVICE FOR THE

LASER

• Do not look directly into the laserbeam

• Do not point the laserbeam towards per-

sons or animals

• Do not point the laserbeam towards

reecting materials

• Do not insert hard objects into the laser

optic

• Clean the laser optic with a soft dry brush

7062244_MaxxSaw_Ma_#1612-19.indb 24 19-12-16 10:30

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CS009 - 7063376 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CS009 - 7063376 Manual

Product: