759584
22
Zoom out
Zoom in
Previous page
1/66
Next page
English
20
.
EXPLANATION OF THE SYMBOLS
WARNING – To reduce the risk of
injury during operation, read the
instructions.
Always wear hearing protection. The
effects of noise can cause hearing
loss.
Wear a dust mask. When working
with wood and other materials,
harmful dust may be generated.
Work with asbestos containing
materials is not permitted.
Wear safety glasses. When working
with electric power tools, sparks,
splinters, chips and dust particles
may be generated and these can
cause loss of sight.
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non-observance of the
instructions in this manual.
Wear protective footwear.
Wear safety gloves.
Electric power tool, protection class
II. This sign symbolises that this unit
corresponds to Protection Class II.
This means that the unit is equipped
with either reinforced or double
insulation between the mains circuit
and output voltage or metal housing
respectively
CE stands for “Conformi
Européenne”, which means “In
accordance with EU Regulations”.
With the CE marking, the
manufacturer conrms that this
Electric tool complies with the
applicable European directives.
Not for wet grinding.
Voluntary test seal „Safety
Tested
CAUTION: LASER BEAM!
Do not look directly into the laser
beam.
Do not point the laser beam at
humans or animals.
Do not dispose the electric power
tool with domestic refuse.
GENERAL SAFETY INSTRUCTIONS FOR
POWER TOOLS
WARNING! READ ALL
INSTRUCTIONS.
Failure to follow all instructions listed below
may result in electric shock, re and/or serious
injury.
Save these instructions for future
reference!
The term “power tool” in all of the warnings
listed below refers to your mains operated
(corded) power tool or battery operated (cord-
less) power tool.
1. Work area
a. Keep work area clean and well lit. Clut-
tered and dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence
of ammable liquids, gasses or dust.
Power tools create sparks which may
ignite the dust of fumes.
c. Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the out-
let. Never modify the plug in any way.
Do not use any adapter plugs which
earthed (grounded) power tools.
Unmodied plugs and matching outlets
will reduce risk of electric shock.
b. Avoid body contact with earthed or
grounded surfaces such as pipes, radi-
ators, ranges and refrigerators. There is
an increased risk of electric shock if your
body is earthed or grounded.
c. Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
7062244_MaxxSaw_Ma_#1612-19.indb 20 19-12-16 10:30
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-CS009 - 7063376 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CS009 - 7063376 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info