Manual Batavia BT-CS009 - 7062244 (page 25 of 66) (English, German, Dutch, French)

759583

Zoom out

Zoom in

1/66

English

sheets can bend under their own

weight. The sheets must be supported

on both sides, at the edges and close to

the saw cut.

e. Do not use blunt or damaged saw

blades. If saw blades with blunt or mis-

aligned teeth are used, the saw cut is too

narrow resulting in increased friction,

jamming of the blade and kickback.

f. Before sawing, rmly tighten the

adjustments of the cutting depth. If the

settings adjust themselves during saw-

ing, the saw blade may become clamped

and a kickback will occur.

g. Be especially careful, if you are making

a plunge cut in an existing wall or other

nonvisible area. The immersed saw

blade can jam when sawing into hidden

objects and cause a kickback.

SAFETY INSTRUCTIONS FOR THIS

COMPACT PLUNGE SAW

a. Check before each use that the safety

guard closes correctly. Do not use the

saw if the lower safety guard does not

move freely and does not close imme-

diately. Never clamp or secure the

lower safety guard in the open position.

If the saw should accidentally fall to the

ground, the lower safety guard may

become bent. Open the safety guard

with the retraction lever and ensure that

it moves freely. Check that it does not

interfere with the saw blade or other

components, at any cutting angle or

cutting depth.

b. Check the condition and operation of

the spring for the lower safety guard.

Do not use the equipment if the lower

safety guard and spring do not work

perfectly. Damaged parts, adhesive

deposits or accumulations of shavings

retard the operation of the lower safety

guard.

c. When making a plunge cut which is not

at right angles, make sure that the

saw’s guide plate can not move later-

ally. Lateral movements can cause the

saw blade to jam and hence result in

kickback.

d. Do not put down the saw on the work-

bench or oor, without the lower safety

guard covering the saw blade. When

slowing down after use, an unprotected

saw blade will move the saw in the direc-

tion opposite to the cutting direction and

will saw whatever lies in its path. Pay

attention, therefore, to the deceleration

time of the saw.

e. Use only sawblades with the correct

diameter according to what is printed

on the saw.

f. When sawing plastics please ensure

not to overheat the saw teeth tips to

avoid melting the plastic.

SAFETY AND OPERATING

INSTRUCTIONS FOR DIAMOND

GRINDING WHEELS

Use

Only use the cut off grinding disc for cut off

grinding and not for rough grinding! Only use

the cut off grinding discs for the materials

indicated and not for any other materials. Risk

of injury! Cutting and cooling!

General Information

This tool insert is fragile, therefore extreme

care is required when handling it. The use of

damaged and incorrectly tensioned or installed

tool inserts is dangerous and can result in

serious injury.

Handling and storage

Tool inserts must be carefully handled and

transported. Tool inserts should be stored in

such a way that they are not exposed to any

mechanical damage or damaging environmen-

tal inuences.

To avoid damage, remove the tool insert before

transporting an electric power tool.

Selection and safe and proper use

Pay attention to the data on the label or on the

tool insert, such as the restrictions on use,

safety instructions or other advice. Do not alter

the characteristic direction of motion of the tool

insert. If there is ambiguity over the selection of

tool inserts, contact the manufacturer or a

specialist. Adhere to the permissible rotation

speeds for the tool insert and the electric

power tool.

7062244_MaxxSaw_Ma_#1612-19.indb 23 19-12-16 10:30

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CS009 - 7062244 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CS009 - 7062244 Manual

Product: